There is no clog, because cold plain water pumped out of washer machine works fine. This all started happening when an adaptor was added to pvc drain pipe to accomidate a discharge from water purifing system
2007-11-10 03:32:15 · 4 answers · asked by WhiteyO 1 in Home & Garden ➔ Do It Yourself (DIY)
Use less soap.
It sounds like the adapter is causing the problem, or the piping in the wall for the washing machine wasn't installed correctly in the first place.
Have the adapter installed correctly.
2007-11-10 03:49:10 · answer #1 · answered by Dan H 7 · 0⤊ 2⤋
This piping affiliation does not sound the final option. normally you may hook the washer into the drain pipe at a point close to to the peak of the washer, say 3-4 ft above the floor. Did somebody upload a 2d connection element to that line for some reason? If it have been a vent for the washer drain, it would boost to above your roof line. you may never vent a sewage line interior your residing house. i could call a plumber to envision it.
2016-10-02 01:00:34 · answer #2 · answered by arleta 4 · 0⤊ 0⤋
It makes absolutely no sense to me that water temperature would make a difference in the draining through waste pipes. Perhaps the vent pipe was blocked or taken out when adapter was installed?
2007-11-10 03:52:09 · answer #3 · answered by Anonymous · 3⤊ 0⤋
The drain isn't taking the water fast enough, regardless of water temp. Have the adapt or installed properly.
2007-11-10 13:58:40 · answer #4 · answered by mightemouse2001 2 · 1⤊ 0⤋