2007-11-07 05:32:40 · 5 answers · asked by double a 1 in Cars & Transportation ➔ Maintenance & Repairs
Already replaced idler arm, driveshaft, and had tires balanced, and front end alignment
2007-11-07 05:38:15 · update #1
This sounds like a tire wear issue. Sometimes when you drive at a specific speed more than any other the tires wear in a certain way that causes a resonance when you hit that speed. It will start out as increased road noise then progress into a slight vibration in the steering wheel. Try rotating the tires in an x pattern. Swap the drivers front with the passenger rear, and the passenger front with the driver rear. If the problem goes away or significantly changes that's your issue.
2007-11-07 06:02:08 · answer #1 · answered by An Angry Viking 3 · 0⤊ 0⤋
To make sure it's not a bad tire or rim, have the tires checked at a Hunter GSP9700 tire balance facility. Only the Hunter machine can detect an out of round tire. Standard tire balance machines will simply show the tire to be balanced.
http://www.gsp9700.com/pub/search/FindGSP9700.cfm
2007-11-07 05:38:39 · answer #2 · answered by bobweb 7 · 0⤊ 0⤋
You need an alignment shop that knows what they are doing. Also, drive shaft not shimmy cause. diy, jack up front end and find out what's loose. Don't forget wheel bearings and ball joints.
2007-11-07 05:49:07 · answer #3 · answered by tronary 7 · 0⤊ 0⤋
Could be the tie rods.. but first check the shimmy dampener...
2007-11-07 05:38:55 · answer #4 · answered by flea 5 · 0⤊ 0⤋
wheel weights,came off,typical wheen you go 4 wheeling.........needs balanced,20 bucks,or radial belts are loose in tire.................if you have mudders(33 inches or more) they are not ment to go over 50 miles an hour,
2007-11-07 05:39:54 · answer #5 · answered by john doe 5 · 0⤊ 0⤋