I'm trying to put together an upgrade, currently unstable: running fine in Linux but Windows XP is not even installable with Blue Screen. Fanning the CPU running at about 40 celsius.
Parts:
AMD Athlon 64 X2 3800+ Socket 939 from eBay
ECS nForce3 Socket 939 from eBay
256 megs of PC2100 DDR 266 from an older AMD 2000+ machine, hopefully this is only thing wrong I do have half a mind to get DDR 400 probably 1GB in qty.
I experienced unstability before that prevent Windows from installing, coupled with low heat I suspect unstability again. I realized this is quite obsolete spec but hardcore gaming is not my aim and this question is quite advanced so I want some concrete answers or tidbits with reasons to back it up; not some teen's hotshot answer.
2007-11-06 22:05:00 · 3 answers · asked by Andy T 7 in Computers & Internet ➔ Hardware ➔ Desktops
i would say that the dimms are not fully supporting the ddr266 modules. That board fully supports the ddr400 standard. So get a 2x 512 ddr400 setup and you should be fine.
ECS Elite nForce3-A939, socket 939, chipset nForce3 250, ATX, FSB 2000, 2xDual DDR400, AGP 8x, 5xPCI, S-ATA, Raid, LAN nForce3-A939. ATX Motherboard
Support socket 939 AMD Athlon™ 64FX, Athlon 64 and Sempron™ processors
Support 8x AGP ATX
Support Dual-Channel DDR400
Specification
CPU Socket 939 for AMD Athlon™ 64 X2 Dual-Core/ Athlon™ 64/ Athlon™ 64 FX processor.
High-performance Hyper Transport CPU interface.
CHIPSET NVIDIA nForce3 250 single chip
North Bridge & South Bridge: nForce3 250
MEMORY 2 x 184-pin DDR DIMM socket support up to 2 GB
Dual-channel DDR memory architecture
Support DDR400/333 DDR SDRAM
EXPANSION SLOT 1 x AGP 8X/4X slot
5 x PCI slots
STORAGE Supported by nForce3
-- 4 x Ultra DMA133/100/66 devices
-- 2 x Serial ATA devices
-- RAID0, RAID1& RAID 0+1 configuration
AUDIO Realtek ALC655 6-Channel audio CODEC
Compliant with AC'97 2.3 specification
LAN Realtek RTL8201CL 10/100 Mbps Fast Ethernet PHY
REAR PANEL I/O 1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x RJ45 LAN connector
1 x SPDIF out connector
1 x Parallel port (LPT)
1 x Serial port (COM1)
1 x Audio port (Line-in, Line-out, Mic-in)
INTERNAL I/O CONNECTORS & HEADERS 1 x 20-pin ATX Power Supply Connector
1 x 4-pin ATX 12V connector
1 x FDD connector supports two 360K~2.88MB FDDs
2 x IDE connectors
2 x Serial ATA connectors
2 x USB 2.0 headers support additional 4 USB Ports
1 x Speaker header
1 x IrDA for SIR header
1 x SPDIF out header
1 x Front panel switch/LED header
1 x Front panel audio header
1 x CD in header
CPUFAN/SYSFAN connectors
SYSTEM BIOS Award BIOS with 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification
FORM FACTOR ATX Size, 295mm*205mm
2007-11-07 00:15:21 · answer #1 · answered by djfear123 6 · 1⤊ 0⤋
i would be unable to bear in mind any on the 2nd. My answer would be India vs Australia, Sydney attempt 2008 = umpiring decrease than the scanner after some severe profile blunders. & New Zealand vs Australia = Melbourne ODI, 1981 = infamous underarm final ball with the aid of Trevor Chappel while NZ necessary 6 runs.
2016-10-15 08:22:58 · answer #2 · answered by Erika 4 · 0⤊ 0⤋
So..
In my opinion Ccleaner is the number one tool for cleaning your pc. I've been using it for more then a year now and it works very well. You can grab your free copy here http://j.mp/UrAHbv
It's amazing.
Have a nice day
2014-08-06 10:36:03 · answer #3 · answered by Anonymous · 0⤊ 0⤋