The Natives of North and South America came up with the notion all on their own as did others across the globe. Certain items are 'native' to peoples across Earth without any notion of those people interacting / having what was once called commercial intercourse. The Bow & Arrow, the Flute, the Fish Hook, examples of each can be found in the America's as well as Polynesia, Asia, Africa and Europe.
The earliest archeologcal sites in America are identified by the arrow heads they used...
here are links and snippets...
http://www.uiowa.edu/~osa/learn/ancient/archery.htm
"""American Indians did not always have the bow and arrow. It was not until about A.D. 500 that the bow and arrow was adopted in Iowa some 11,500 years after the first people came to the region. Primary benefits of the bow and arrow over the spear are more rapid missile velocity, higher degree of accuracy, and greater mobility. Arrowheads also required substantially less raw materials than spear heads. A flint knapper could produce a large number of small projectile points from a single piece of chert. Even with the gun's many advantages in the historic era, bows and arrows are much quieter than guns, allowing the hunter more chances to strike at the prey.
Indians used arrows to kill animals as large as bison and elk. Hunters approached their prey on foot or on horse back, accurately targeting vulnerable areas.
The choice of materials and the design of arrows and the bow were not random. Some materials were generally more readily available than others. Environmental conditions also affected the choice of materials. Humidity affects wooden bows, and temperature affects horn and antler. The intended use of the system, on foot or horse back, for instance, affects the final design. Bows used while mounted on horseback tend to be shorter than the bows used when on foot. Since the length of the bow determines the stress placed on the bow when drawn, shorter bows tend to be made of composite materials while bows used when on foot can be made of wood.
Indians used a variety of materials to make the bow stave, relying on materials that met certain requirements, most important of which is flexibility without breaking. Several species of plants and some animal materials met these requirements. Ash, hickory, locust, Osage orange, cedar, juniper, oak, walnut, birch, choke cherry, serviceberry, and mulberry woods were used. Elk antler, mountain sheep horn, bison horn, and ribs, and caribou antler also were used where available.
Bow construction techniques included a single stave of wood (self bow), wood with sinew reinforcement (backed bow), and a combination of horn or antler with sinew backing (composite bow). Hide glue was used to attach the backing. Bow strings most frequently were made of sinew (animal back or leg tendon), rawhide, or gut. The Dakota Indians also used cord made from the neck of snapping turtles. Occasionally, plant fibers, such as inner bark of basswood, slippery elm or cherry trees, and yucca were used. Nettles, milkweed, and dogbane are also suitable fibers. Well-made plant fiber string is superior to string made of animal fibers because it holds the most weight while resisting stretching and remaining strong in damp conditions. However, plant fiber strings are generally much more labor intensive to make than animal fiber strings, and the preference in the recent past was for sinew, gut, or rawhide.
Arrow shafts were made out of shoots, such as dogwood, wild rose, ash, birch, chokecherry, and black locust. Reeds from common reed grass were also used with some frequency throughout North America with the exception of the Plains where reeds did not grow. Shoots were shaved, sanded, or heat and pressure straightened. Tools made of bone or sandstone were used to straighten the shaft wood. Because they are hollow and light, reed-shaft arrows typically have a wooden foreshaft and sometimes a wooden plug for the nock end of the arrow. If a foreshaft was used, it could be glued to the main shaft, tied with sinew, or fit closely enough to not need glue or sinew.
Prehistoric points or heads were made of stone, antler, or bone. Thin metal, bottle glass, and flint ballast stones also were used to make points in the historic period.
Points were attached to the arrow shaft with a variety of methods. Most frequently, the arrow shaft would have a slit cut into the end to accept the point. Sinew would then be wrapped around the shaft to pinch the slit closed. Points could also be hafted directly by wrapping sinew around the point and the arrow shaft. Metal points generally were attached using the same techniques and only infrequently attached by means of a socket.
Indians made many types of arrowheads. In addition to the traditional triangular stone arrowhead, carved wood or leather points have large, broad surfaces. Different types of arrow tips were used for different purposes, such as for large game versus small game. Small triangular stone points are not bird points: large, blunt-tipped wooden points were used for birds. Harpoon-like points also exist and were used in fishing.
Fletching of bird feathers was sewn to or inserted in the shaft. Feathers of wild turkey were preferred but many other birds, including eagle, crow, goose, hawk, and turkey, were often used. Sinew was generally used to attach the fletching by first stripping some of the feathers from the front and back of the vane and then tying the vane to the shaft in front of and behind the remaining feathers. Sometimes plant twine was used to sew through the quill. Hide glue was used with or instead of sinew ties. Animal products like sinew have the advantage of tightening as they dry.
The fletching balances the weight of the arrowhead to prevent the arrow from tumbling end-over-end in flight. When fletched properly, an arrow may spin in flight producing an ideal trajectory. A similar effectiveness is gained by placing grooves in the barrel of a rifle to cause the bullet to spin. In fact, until the invention of rifled guns, bows generally proved to be more accurate and could shoot arrows further than powder-thrown missiles.
The bow and arrow is a complex technology. Each element must be balanced in proportion to the others and to the user to make an effective tool. The bow acts as a pair of springs connected by the grip or handle. As the string is pulled the material on the inside or belly of the bow limbs compresses, while the outside or back is stretched and is placed under tension. This action stores the energy used to draw the string back. When the string is released, the limbs quickly return to their state of rest and release the energy stored by drawing the string. Therefore, the power of a bow is measured in terms of draw weight.
The height and strength of the archer determines the ideal draw weight of the bow. A combination of the length of draw and the draw weight of the bow determines the cast (propelling force) of the bow. Adjusting either or both of these features allows the arrowhead to be made larger or smaller as needed.
The draw weight of the bow also determines the ideal weight and diameter of the arrow shaft. Even a bow with a high draw weight can only throw an arrow so far. If the arrow is too heavy, it will not fly far or fast enough to be very useful. A shaft that is too thick or too thin will also lead to problems. It must compress enough to bend around the bow stave as it is launched by the string. If it does not bend, the arrow flies to the side of the target. If it bends too much, it will wobble (reducing the striking force) or even shatter.
The length of the draw, also determined by the body of the archer, determines the length of the arrow. The maximum cast of the bow determines the maximum weight of the point. This is how we know that certain "arrowheads" can not really have been used on an arrow, at least not to any good effect. A general rule of thumb is that a stone arrowhead will be less than 1 1/2-x-3/4-inch in dimensions and will generally weigh less than one ounce. Larger "arrowheads" probably would have been spear, dart, or knife tips.
For further reading...
Ackerman, Laura B.
1985 The Bow Machine, Science 85, July/August, pp. 92-93.
Allely, Steve, and Jim Hamm
1999 Encyclopedia of Native American Bows, Arrows & Quivers: Volume I: Northeast, Southeast, And Midwest. Lyons Press, New York.
Allely, Steve et al.
1992 The Traditional Bowyer's Bible, Volumes 1-3. Lyons & Burford, New York.
Hamilton, T. M.
1982 Native American Bows. Special Publications No. 5, Missouri Archaeological Society, Columbia, Missouri.
Hamm, Jim
1991 Bows & Arrows of the Native Americans. Lyons and Burford, New York. [Guide to construction.]
Hardy, Robert
1992 Longbow: A Social and Military History. Lyons and Burford, New York. [Appendix has detailed description of bow and arrow physics.]
McEwen, Edward, Robert L. Miller, and Christopher A. Bergman
1991 Early Bow Design and Construction, Scientific American, June 1991, pp. 77-82.
Pope, Saxton T.
1962 Bows and Arrows. University of California Press, Los Angeles.
Stockel, Henrietta H.
1995 The Lightening Stick: Arrows, Wounds, and Indian Legends. University of Nevada Press, Reno.
Hurley, Vic
1975 Arrows Against Steel: The History of the Bow. Mason Charter, New York. [Discussion of effectiveness of the bow compared to firearms.]
Pamphlet text and illustrations by Tim Weitzel.
Cover art by Pranik Saiyasith.
This pamphlet is made possible through a grant from the ISF administered by the Iowa Academy of Science. """
http://www.indians.org/articles/bow-and-arrows.html
"""Part of a Native American’s livelihood for hundreds of years was the bow and arrows. Without the proper tools, they could not hunt for food or defend their land and people in war. You might think that the natives invented the bow and arrows. However, that is not the case. They did incorporate them as part of their arsenal for hunting and warfare.
The early bow and arrows were made from the wood of various trees like cherry, ash, cedar, oak, hickory and practically any other wood available at the time. Sometimes, the rib bone of animals or even antlers and horns were used. For the string portion of the bows, fibers were harvested from local plants like milkweed and yucca. But because harvesting and preparing the plants took more time, tendons, stomach lining or rawhide from animals were primarily used instead.
The shaft of the arrows was primarily made from the wood native to the region. Even hardy reed grass was used in the construction of bow and arrows. The Indians were resourceful in using what was available at the time.
For the arrow tips, there was a wide variety of materials used. When metal was available, it was used for the tips in bow and arrows. Flint was a popular material as was animal bone, wood and stone. Each type of tip was constructed differently based on what was being hunted and killed. There were harpoon-like arrow tips for fishing and large blunted models for small game and birds. Finding these bow and arrows today would give you a good glimpse into what the natives lives were like back in the day.
The fletching or end of the arrow was often made from the feathers of eagles, turkeys and hawks. However, any other birds in the local area were also fair game. The fletching part of the bow and arrows makeup was to provide a balance and create a trajectory suitable for hitting a target.
The construction of the bow and arrows used by the Native Americans was clever. The physics involved depended a great deal on the length and weight of all the materials involved in the bow and arrows. While the natives may not have understood the concept of physics and trajectory, they definitely mastered the practical aspects of it.
Disclaimer: Indians.org does not personally endorse or support any of the comments made within the writings of this article. """
Peace.......................................................ppppfftttzzzzzzzz !!!
(ah)
2007-11-06 17:50:42
·
answer #4
·
answered by JVHawai'i 7
·
1⤊
0⤋