There is a strange problem with this toilet. Some day the water filling became very slow. I checked the water pressure. It looks alright. So I adjust the fill valve pipe (remove it and re-install it). It works...but only once. After I empty the tank, the problem appears again. I adjust the pipe again, works, still only once. Very strange for me. Is there anything wrong with the valve? Maybe I should buy a new fill valve. Where to buy it?
2007-11-06 01:29:42 · 3 answers · asked by Jay 4 in Home & Garden ➔ Do It Yourself (DIY)
Go to a Home Center (Lowes, Home Depot) or a hardwares store and buy a Fluidmaster 400A fill valve. They are under $10 and have great installation instructions.
2007-11-06 01:58:27 · answer #1 · answered by sensible_man 7 · 1⤊ 0⤋
Certainly "TANK GUTS" are relatively inexpensive. You state the WP is OK? Have you checked that at the inlet valve below the toilet?
2007-11-06 01:52:41 · answer #2 · answered by DIY Doc 7 · 1⤊ 0⤋
Replace the rubber seal /gasket on the fluid master
2007-11-06 04:53:22 · answer #3 · answered by Anonymous · 1⤊ 0⤋