Depends on whether or not you choose to use a factory distributor, or an aftermarket and whether or not its a new distributor or a remanufactured one.
A remanufactured aftermarket distributor is about $300 US; a new aftermarket is about $350 US at Autozone.com
http://www.autozone.com/R,APP38341/vehicleId,1958401/initialAction,partProductDetail/store,/partType,00030/shopping/partProductDetail.htm
a new factory distributor is probably twice the aftermarket price.
hope that answers your question
2007-11-06 03:21:01
·
answer #1
·
answered by honda guy 7
·
0⤊
0⤋
This Site Might Help You.
RE:
how much is a distributor for 98 honda civic ex?
2015-08-06 08:14:49
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
I paid $280 for a new distributor and $22 for a distributor cap from my local auto parts store for my 98 Honda Civic Ex
The autoshop would have charged me $568 for a new distributor and labor and additional $122 for the distributor cap and labor.
2007-11-08 07:54:17
·
answer #3
·
answered by jose o 6
·
0⤊
0⤋
Ok, from what you have said it sounds like the throw-out bearing maybe bad; although it could be your slave cyl - although without 'hanging' in gears (while shifting) I wouldn't think it was. The throw out bearing is under a semi-no-load when the clutch is not pushed in, when you push it in it goes under load and they normally stop making noise then / however that will change where it will make more noise when you push it in (this is normally right before they go out) as a word of advice, get it fixed - if it goes out there is a possiblity that it could damage a LOT of things by allowing the fork to get into the clutch splines. ALSO - the bearing replacement and clutch replacement in labor is only about 15 minutes in difference / pay the money and get the clutch and presure plate done while you are in there - it is only parts cost.
2016-03-22 15:39:27
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋