when the car is in gear and i try to turn it on it jumps and wont turn on.
2007-11-04 10:33:37 · 6 answers · asked by nickelsw7869 1 in Cars & Transportation ➔ Maintenance & Repairs
adjust the clutch, its not releasing enough. but if it is hydralic, the clutch is rooted and its time to get the clutch, pressure plate and throwout bearing replaced
2007-11-04 10:44:26 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I'm guessing what you meen is that when you have the car in gear with the clutch pedal pressed, and then you try to start the engine, the engine won't turn over freely and the car tries to move. It sounds like the clutch isn't fully disengaging when you press the clutch pedal fully.
2007-11-04 10:41:01 · answer #2 · answered by mad dawg 3 · 0⤊ 0⤋
Clutch isn't releasing. Might be a stretched cable or if it's hydraulic, a leak. Check the reservoir. and fill it w/ brake fluid if it's low.
2007-11-04 10:53:00 · answer #3 · answered by Bob H 7 · 0⤊ 0⤋
The clutch or clutch cable is gone. Sad but true.
2007-11-04 10:42:27 · answer #4 · answered by Wine and Window Guy 4 · 0⤊ 0⤋
Sounds like you have a bad clutch ,so it is not disengaging the motor from transmission .
2007-11-04 10:54:42 · answer #5 · answered by Brian H 1 · 0⤊ 1⤋
I'd first check the clutch. If it's not that it has to be the sychronizers in the tranny.
2007-11-04 11:19:18 · answer #6 · answered by amanda b 2 · 0⤊ 1⤋