Easiest way is to go to Start then Run and type charmap, then you can cut and paste any character in any font.
2007-11-04 06:40:49
·
answer #1
·
answered by Anonymous
·
2⤊
0⤋
MS-DOS still underlays most windows programs, and that is based on the old ASCII (American Standard Code for Information Exchange) and the later ANSI (American National Standard Institute) codes.
You can get this from the special character function or direct with a shortcut, but this depends on the font you are using: These days, codes can call up different symbols depending on the Font set in use. The little hearts and smileys etc weren't in the original code list.
e.g. 157 was originally the symbol for the Japanese yen but in the font Yahoo uses it comes up as "Ø"
Holding the left hand only ALT key plus using the number pad to type "171" lets you type "½" as one character.
Link for looking up the original and standard codes below
2007-11-04 07:06:51
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
If you have no other symptoms and the pain is only reproduced when you take deep breaths and move certain ways, it points towards a musculoskeletal problem such as costochondritis (inflammation of that cartilage that connects the ribs to the sternum) rather than a cardiac or respiratory issue. This is very common in teenagers. It should go away on it's own. Unless contraindicated, take Ibuprofen. If the pain gets worse and/or you develop any other symptoms then see your must see a Doctor. A pneumothorax probably wouldn't present like this.
2016-05-27 08:20:26
·
answer #3
·
answered by ? 3
·
0⤊
0⤋
The EASIEST way to get them, is by bringing up the character map.
Start Menu>> All Programs >> Accessories>> System Tools>> Character Map.
Scroll down until you find the little heart and the other symbols you want :) You can choose from other fonts too :)
Hope that helped
2007-11-04 06:44:53
·
answer #4
·
answered by Livi 2
·
1⤊
0⤋
In most cases where the system allows these, You just have to press the alt key, And then a number combination for the corrosponding picture, For example, on this, Alt+36 is a ?, Or Alt+89 is a Y...its mostly a lot of guesswork to find more intresting ones, Or you can google it for a site with a list of them =]
2007-11-04 06:42:21
·
answer #5
·
answered by Anonymous
·
1⤊
0⤋
Go to Start>Programs>Accessories>System Tools and open Character Map, this will show you all the fonts on your PC. click on the symbol you want to create and in the bottom pannel it will show you what key strokes you need to do to get that symbol
2007-11-04 21:17:15
·
answer #6
·
answered by alan v 4
·
0⤊
0⤋
You need the ascii number then instead of typing letter on keyboard hold alt key enter number - 171 gives ½
2007-11-04 06:54:03
·
answer #7
·
answered by Fred3663 7
·
0⤊
0⤋
i just copy and paste them in from the symbols in word
ir you may have something called charmap
you have to download stuff to do the codes - google it if you want this
hope this help
good luck
2007-11-04 06:42:35
·
answer #8
·
answered by looby loo 4
·
1⤊
0⤋
good question, i just figured it out, all i did was copy and paste. Its the easiest!!
♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥
2007-11-05 05:35:13
·
answer #9
·
answered by noneofyourbusiness1300 2
·
0⤊
0⤋
i always wonered too, thanks for question!
♥ cool!♥♠
i went to start then run.... charmap
2007-11-04 06:49:27
·
answer #10
·
answered by ✿❃❀❁✾ Stef ♐ ✿❃❀❁✾ 7
·
0⤊
0⤋