I have a cat-5 connection coming out of my wall. How do I hook up a network. Do I still need a router?

Answer 1

If its just your computer, get a cat-5 cable and plug it into your ethernet jack in the back of the pc
its its more than one computer youll need a router

Answer 2

What is the CAT-5 cable in the wall hooked up to?

1. If it's a router and you are connecting to a network for your complex (for example) - then you want to go from the wall to a switch ( $20 at Office Depot) and from the switch to your computers. (don't use a router with DHCP enabled - that would take down the complex)

2. is it a phone line that you have to get connected at a central box? You'll need to call your local phone service and find out.

3. Is it a CAT 5 cable connected to nothing? In that case it's no use at all

Answer 3

In short the answer is yes you will need a router if your goal is to connect a network of computers. You need to investigate to find out where those existing cat 5 connection coming out of the wall begin and end. If it is a true network wired location all the jacks will terminate in one central location to connect to a router.

Answer 4

Hmmm. POS stands for element of Sale. So i'm uncertain of what you asked for, what you have & what you surely needed. The blue connectors are likely RG-40 5 (similiar to telephone jacks different than it has 8 wires rather of four) If the contractor wasn't an IT guy, he probably only under pressure out the abode & did no longer make any connections. Did he charge you for a router or a swap? If no longer, all you have are wires. If he did charge you for the two, do you realize if he put in it & the place it particularly is? if so is it grew to become on? Does it have cables plugged in to it? To many "if's" in no longer with the ability to surely SEE what you're speaking approximately. you will possibly desire a cable tester, superb variety is a fox & hound. however the fee for that???? i might pass with Geek Squad or another networking enterprise who may be prepared to aim & config your abode. sturdy success

Answer 5

You'd need to know what's on the other end of that CAT-5 connection to get an answer to your question. Some phone systems use RJ-45 ports just like networks do and if you connect a network card to it you could blow your NIC.

Answer 6

unless you have more than one pc to hook up, no you do not need a router. if ur running windoes xp, make sure its setup to obtain an IP address automatically, this will save a lot of time+future trouble if theres any connectivity issues. to see if ur pc is obtaining an address automatically,access your control panel/network connections/double click on Local Area Connection and if you see "Assigned by DCHP" at the top of the Support tab, it means u are getting your IP from your modem or router, which one will be the default gateway..depending on who provides your broadband connection, you should have a CD from them at the least, which will setup your pc easily for auto-connection..but if ur hooking more than 1 pc or maybe even a games console you will need a router if u want them both to be switched on at the same time..google decent routers that support "UP'n'P" which will save a lot of trouble and basically means you dont have to set all the relevant protocols+ports to your programs for each connection,and most of em nowadays are auto set as the DHCP server, which basically means that all devices hooked up to the router will be assigned an IP address for automatic routing of incoming traffic when they come online..the router will also come with instructions to get you up+running kwik+they can all be configured manually too if necessary..