OK, so i have the disc that comes w/ my printer which let me install the drivers for my hardware. i just reformatted my pc w/ the printer's USB cable inserted to one of USB ports(if this info will help you in solving my problem) so i have to install it again. unfortunately, Brother MFL Pro Suite Installation didn't let me continue installing the device. the installation says that i must plug in the USB cable(w/c is recognized by my sysytem), switch the machine on, then wait for the installation process to continue. i did it but the installation didn't continue. what should i do now? help me please... for additional info, im running windows xp service pack 2.
2007-11-04 01:06:49 · 8 answers · asked by aquariusXgirL 2 in Computers & Internet ➔ Hardware ➔ Printers
i have tried different usb port but did'nt work..
2007-11-04 01:25:03 · update #1
try turning the computer off and back on with the printer set up and see if it will recognize a "new device" and if it will ask if you want it to find the driver, then say "yes".
2007-11-04 01:16:03 · answer #1 · answered by Anonymous · 0⤊ 1⤋
DISCONNECT printer from PC
UNINSTALL program/drivers (check add remove progs under control panel, or the printer folder in control panel too)
restart PC
Insert CD for printer,
Run installer
Connect printer ONLY when asked to do so, it will now detect printer correctly and install it
Enjoy it.
2007-11-04 01:54:28 · answer #2 · answered by stu_the_kilted_scot 7 · 0⤊ 0⤋
It seems like you may need to turn on the printer and then plug it in to the usb port. Let the computer recognize that there is a new component plugged in and install from there. If that does not work you may need to go to the brothers website and down load the drivers from there.
2007-11-04 01:13:16 · answer #3 · answered by Steven E 2 · 0⤊ 1⤋
this may work: unplug the printers usb cable, go to Printers and Faxes and untinstall the printer, then start over with the install cd
2007-11-04 01:13:13 · answer #4 · answered by chmod 4 · 0⤊ 1⤋
Brother Driver Help http://goo.gl/u20xCI
2015-05-07 20:07:18 · answer #5 · answered by ? 3 · 8⤊ 0⤋
if non of what the guys have provided worked out...contact your re-seller or check the website....
i had an hp printer and after upgrading to win-xp i couldnt define the printer...so what i did was contacting HP online support they told me another way (difficult one) to solve it....
try it
2007-11-04 01:25:50 · answer #6 · answered by Hanna 2 · 0⤊ 0⤋
Please use the MFC-210C driver as an alternative solution.
Go to these two places for help
This one is the download site for the drivers and how to install them:
http://solutions.brother.com/linux/sol/printer/linux/lpr_drivers.html
These next two will help you with other things.
http://www.brother-usa.com/lp/brother-printers.aspx?s_kcid=brother%20printer|1001087204
http://www.fixya.com/support/p402547-brother_dcp_110c_all_in_one_inkjet/solutions
2007-11-04 01:13:53 · answer #7 · answered by paradisebahamas 1 · 0⤊ 1⤋
See if this firmware update will help you
2016-04-02 04:05:34 · answer #8 · answered by ? 4 · 0⤊ 0⤋