2007-11-03 15:55:45 · 9 answers · asked by colincameron1 1 in Science & Mathematics ➔ Chemistry
The surface is cleaned, roughened, and sprayed with a substance that has one end that binds to the metal and the other end is a fluorocarbon chain, chemically similar to teflon; I think they use CF3(CF2)8COOH. The "head" of the molecule sticks to the surface and the "tail" sticks to the teflon.
2007-11-05 20:16:22 · answer #1 · answered by Facts Matter 7 · 0⤊ 0⤋
If you have any metallic fillings in your teeth, they are not "glued" in place, but are simply held in by what is called a press-fit. If the bottom of the filling is wider than the top, it won't come out. If the surface of a pan is made porous and somewhat rough, the applied Teflon is held in place through mechanical forces (peels off sometimes too).
2007-11-03 16:07:48 · answer #2 · answered by kentucky 6 · 0⤊ 1⤋
Teflon glue
2007-11-03 15:58:43 · answer #3 · answered by Anchor Cranker 4 · 0⤊ 1⤋
They superheat each and every thing in the process production, perhaps. the two way, teflon is undesirable for you. The vapors it emits in the process heating can kill birds. This took place on the San Diego Zoo whilst they beginning coating warmth lamps with teflon, they lost like 2 hundred birds. forged iron is the place that's at. that's nonstick without all the extraordinary chemical components entering into your physique.
2016-12-15 15:47:12 · answer #4 · answered by miceli 4 · 0⤊ 0⤋
somethings stick to teflon just not like food
2007-11-03 16:00:19 · answer #5 · answered by david c 1 · 0⤊ 0⤋
Non-sticks are applied in layers, just like paint. The first layer is the primer - and it's the special chemistry in the primer that makes it adhere to the metal surface of a pan. The primer will adhere either to a substrate that is prepared by grit blasting or roughening the surface, or it can be applied over a smooth substrate.
2007-11-03 16:05:48 · answer #6 · answered by Anonymous · 2⤊ 0⤋
YOU CAN DO TEFLON COATING ON STAINLESS STEEL BY THE SAME METHOD WHICH IS USED FOR ALUMINIUM COOKWARE. YOU HAVE TO SHOTBLAST THE SURFACE AND TEFLON COATING IS SPRAYED ON THE SURFACE FOR THE REQUIRED THICKNESS(50 MIC) THEN IT IS KEPT IN OVEN FOR CURING, YOU CAN CONTACT ANY OF THE JOBSHOPS WHICH ARE DOING THE SAME.
ELANGOVAN
- COIMBATORE,TAMILNADU,INDIA
http://www.finishing.com/80/05.shtml
2007-11-03 20:52:16 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Er, could it be designed that way?
2007-11-03 16:05:40 · answer #8 · answered by Anonymous · 0⤊ 1⤋
heat.. its sprayed and baked...
2007-11-03 16:05:01 · answer #9 · answered by Anonymous · 0⤊ 1⤋