2007-11-02 14:53:59 · 4 answers · asked by Jag . 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
If your referring to the lower intake and your torque wrench shows Newton Meters its done in 3 phases to 6,12, and 15 Nm. what that translates to in ft lbs I dunno but im pretty sure 65 is a little high. The 4 bolts in the middle are torqued first in an X pattern than the back two and finally the front two. Dont forget to put a good bead of silicone across the front and back overlapping the gaskets 1/2" on each end.
2007-11-02 17:51:25 · answer #1 · answered by Anonymous · 0⤊ 0⤋
2000 S10 Specs
2016-11-14 08:19:33 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Your local auto parts store has a repair manual for your vehicle for around $20 with all the torque specs and other good info. No sane or prudent person would start removing and replacing components without one.
2007-11-02 15:00:27 · answer #3 · answered by mustanger 7 · 1⤊ 0⤋
65 foot lbs. and start on one side in the middle then the same position on the other side an start making circles until you have went all the way out
2007-11-02 15:07:19 · answer #4 · answered by Anonymous · 0⤊ 1⤋