English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

There is a simple way to flush a toilet without the running water working. The bowl has water in it at first and then you need to flush only to find out that the water main busted outside and there is no running water. How do you flush that toilet?

2007-11-01 20:37:08 · 22 answers · asked by Anonymous in Home & Garden Do It Yourself (DIY)

22 answers

You need to fill the back of the tank up with more water so you can flush it. You'll have to do that every time you flush until you get the water line fixed.

2007-11-01 20:39:19 · answer #1 · answered by dcstogner 2 · 1 1

Just fill the bowl with water, then use a plunger to flush the water through. I think you have worse problems then an unflushable toilet if your water main is broken. Better call a plumber.

Wait...are you saying that the toilet is broken or there is no running water? If there is no running water but the toilet isn't broken just fill the reservoir with water from a neighbor.

2007-11-01 20:40:21 · answer #2 · answered by Anonymous · 0 1

It is true take a large bucket of water and pour it into the bowl at a moderate pace. It will fill the bowl up and cause the flushing as if you were to pour water into the tank. You might also find that it put a little extra power into it.

2007-11-01 20:41:14 · answer #3 · answered by Jason M 3 · 1 1

If you have access to any water you can take a bucket and pour it directly into the toilet bowl and it will flush.

2007-11-02 01:45:12 · answer #4 · answered by Anonymous · 0 0

You can always get water from somewhere else (store, pond, stream, friend on a different water main network) and add it to the tank on the back of the toilet to make it flush.

2007-11-01 20:40:18 · answer #5 · answered by Anonymous · 0 1

I believe all you need to do is grab a bucket, fill it with water, and dump it into the toilet at a moderate speed and the toilet will eventually flush

2007-11-01 20:39:27 · answer #6 · answered by Anonymous · 1 1

there should be enuff water in the tank to do that first flush....

then, for the next one, you'll have to find a bucket and fill it up ... look for a pond or swimming pool type thing.... go out to the water main that busted and fill 'er up there!....

2007-11-02 01:41:50 · answer #7 · answered by meanolmaw 7 · 0 0

i don't think you can do it unless you can find some water somewhere and pour it either down the toilet all at once or fill up the tank again and flush.

2007-11-01 20:39:53 · answer #8 · answered by ruffrydah1983 2 · 1 1

If you can get water anywhere else fill a bucket and just poor it into the bowl until it goes down.

2007-11-02 03:06:12 · answer #9 · answered by lenzix5 4 · 0 0

Fill the back tank by bucket, cup, bowl, whatever, and then flush when full. Use any liquid you have in the house, bottled water, soda, urine, whatever.

2007-11-01 20:40:21 · answer #10 · answered by James M 4 · 0 1

fedest.com, questions and answers