2007-10-29 12:34:27 · 4 answers · asked by bethany31 1 in Home & Garden ➔ Cleaning & Laundry
Usually, you open the lid and grab the top just inside the lid. You then pull the top sharply toward yourself. This should release a latch mechanism that allows you to tilt the top back.
2007-10-29 12:42:16 · answer #1 · answered by Paul in San Diego 7 · 0⤊ 0⤋
Take 2 screws off the base of the washer and the front panel comes off easily.
take 2 more scews off under the top to get to the problem.
The problem in these old maytags is a part called the injection bladder as seen below;
the next link is shows a picture of the top poped and the part location.
2007-10-29 13:04:24 · answer #2 · answered by Anonymous · 4⤊ 0⤋
Take Top Off
2016-10-29 03:25:48 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Try this site:
http://www.acmehowto.com/howto/appliance/washer/check/open.php
or this one:
http://fixitnow.com/2005/02/appliance-repair-revelation-opening.htm
Don't just start yanking on panels because you could end up breaking the fastener holding it there. I had one washer where you had to yank the top off. The next one had two little screws that held the control panel on and it came apart from there.
2007-10-29 12:46:34 · answer #4 · answered by Neebler 5 · 0⤊ 0⤋