how can install linksys wireless g ehternet bridge in my LAN?

Answer 1

Well, a wireless bridge is simply a device to receive wireless and pass it to ethernet device on the lan.

To make it work with your lan you first need an access point or wireless router on your lan that you plan to connect into. Once that is setup you simply set the bridge to the same SSID and security settings, you will see the status change to connected. Once connected you simply plug the ethernet output to the device you want to use and the bridge will make a connection for that device.

Think of the bridge as a wireless receiver all it is doing is replacing an cat 5 cable with a wireless signal.

See the linksys support site it has all the information on setting up your bridge. You will need the full model number.
http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1114037290855&pagename=Linksys%2FCommon%2FVisitorWrapper

Here is the pattern
DSL/Cable Line etc ----->to wireless router/AP )))))))))) to Wireless Bridge-----> to computer/game device etc

Answer 2

iv`e tried that stuff and most of it sucks.or maybe you nneed WEP key access