I can't believe I have to ask this, but I have spent over an hour trying to figure it out myself and I need to try something new.
Can someone please tell me how to access the light bulb housing in a Broan Bathroom Exhaust fan model BR-751? I have tried to unscrew the frosted glass but it only truns 1/2 an inch and I can not see any release springs or pins and I really need to get some light into my bathroom ... Thanks!
Please visit http://www.kitchensource.com/bathroom-fans/br-750.htm to see the model and specs.
2007-10-28 15:59:23 · 6 answers · asked by sunflwr324 2 in Home & Garden ➔ Maintenance & Repairs
The piece that the frosted glass is mounted in, (the grill you see going around it), pulls down. It has 2 springs, one on either side. Squeeze the spring together, and it will pull down out of the slot, and you can change the bulb.
To put it back up, just squeeze the spring back together, and insert it into the slot, then push the housing back up to the ceiling.
Have Fun
2007-10-28 16:07:27 · answer #1 · answered by thewrangler_sw 7 · 2⤊ 0⤋
Pull down grill carefully..
There are springs on each side of the light.. squeeze them, that will partially release the light from the ceiling.
Pull out the plug type electrical connection which will release the entire grill.
The frosted glass removes from grill by pushing in the plastic that is holding it in place on each side.
You can now access the bulb.
2015-08-10 05:56:16 · answer #2 · answered by Mimi 2 · 0⤊ 0⤋
Nautilus Exhaust Fan
2016-11-08 06:49:59 · answer #3 · answered by mumm 4 · 0⤊ 0⤋
Broan 750
2016-12-26 11:31:39 · answer #4 · answered by Anonymous · 0⤊ 0⤋
i'm just guessing but try to turn that frosted glass and wiggle it a bit. I think its just binding a bit
2007-10-28 16:10:55 · answer #5 · answered by ben s 4 · 1⤊ 0⤋
Hope this helps!
2015-05-02 22:44:40 · answer #6 · answered by Anonymous · 0⤊ 0⤋