and now it's make a loud vacam noise everytime mash the gas and it's lose power and accerlation so what is my promblem
2007-10-28 14:40:22 · 5 answers · asked by reginald r 1 in Cars & Transportation ➔ Maintenance & Repairs
Sounds to me like it was installed improperly by a shade tree tech instead of someone familiar with replacing those. Your leak very well may be the intake, hopefully the second time around is better for you then the first good luck.
2007-10-28 14:49:40 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If you hear the sound, it's pretty obvious that you have a vacuum leak somewhere on the intake manifold. Make sure the intake manifold is not cracked anywhere and check around the intake manifold gasket. Use a piece of fuel hose about 3 feet in length as a stethoscope along the intake manifold, it will help guide you to the location of the leak.
2007-10-28 14:44:50 · answer #2 · answered by hsueh010 7 · 1⤊ 0⤋
Check and make sure there are no loose connections, and all the rubber hoses are hooked on tight. Sounds like you have a vacuum leak somewhere, probably after your MAF, that is causing some problems.
2007-10-28 14:43:16 · answer #3 · answered by zanilth1984 4 · 2⤊ 1⤋
sounds as though you do not have a tight gasket seal. had the same problem with my 88 Lincoln except it was roaring full throttle due to getting to much air
2007-10-28 14:44:38 · answer #4 · answered by hermitofnorthdome 5 · 2⤊ 0⤋
did you hook up all your vacuum hoses? were any left unplugged? it has to be a vacuum leak
2007-10-28 14:43:17 · answer #5 · answered by Zack M 2 · 2⤊ 1⤋