2007-10-28 13:17:23 · 5 answers · asked by bradley f 1 in Cars & Transportation ➔ Maintenance & Repairs
C.V. joints. What year is it? The 06 had a problem with the steering shaft maybe thats it?
2007-10-28 13:25:41 · answer #1 · answered by ♥Kempa♥ 4 · 0⤊ 0⤋
Ball Joints which is located on the upper and lower A arm.
Quick fix just need a hammer and a joint fork and hammer the new one in. if you wait to long the ball will come out of the joint which will cause the wheel to collapse into the wheel well. not good when driving
2007-10-28 21:25:33 · answer #2 · answered by mechanicoif3 2 · 0⤊ 0⤋
If 4wd it could be a cv joint but most likely either an upper, or lower ball joint. A cv joint usually is noisy when moving, a ball joint is usually when turning, it doesn't matter which one, replace one, replace them all. anther could be control arm bushings. to test them, jack your front end up, and put on jack stands. use a pry bar and check for movement in all moving parts, on the front end many things can wear out at once.
2007-10-28 20:32:26 · answer #3 · answered by bill s 3 · 0⤊ 0⤋
Front C.V. joints could be bad, or just one of them. Or maybe you have a bad tie rod end on its way out.
2007-10-28 20:22:01 · answer #4 · answered by Tony G 3 · 0⤊ 0⤋
Upper, or lower ball joints?
2007-10-28 20:24:10 · answer #5 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋