best way to remove dents from a car?

Question

Hi,

Can someone tell me the best way to remove dents from a car,about the size of a tenis ball,there are about 4 on a car i want to buy( the car is a really good price because of the dents) and was wondering how much it would cost to sort out?

thank you!!

Answer 1

You can get some suckers (a bit like small sink plungers) from car accessory stores, you just use them to pull the dent out.

Answer 2

This depends on were the dent are, if for example you can get to the back of the dent by removing a panel then you can push them out by hand. If you cannot get to the dents from behind then the best way to remove them is to get a slide hammer, drill a small hole in the centre of the dent, screw a small self tapping screw into the hole and then using the slide hammer pull the dent out.

Answer 3

It all depends on where they are, there are some specialist firms that will come out to you and try and fix it, but if you want to have a go yourself you usually have to push out the dent from the rear of where it is, if you want them doing by a paint shop it should cost a couple of hundred, if you can get access to the dents sometimes they will just pop out back into place

Answer 4

look for paint-less dent remove company, they have dent-tech here in leicester but if you can find someone like that where you live they have years of experience and have all the equipement should only cost you £100ish maybe less. They will use the sucker to get the main dent part out then make it perfect with speical tools.

Answer 5

Get a powerful magnet to pull out the dents.The dents sound like they were intentional,so it should be easy.

Answer 6

THAT'S RIGHT, JUST USE A TOILET PLUNGER AND WET THE SURFACE AND PULL.

Answer 7

http://www.pops-a-dent.net/index.html