How do you reset the maintenance light for oil changes on a 2007 honda accord?

Answer 1

On the dash, you will see the reset button by the odometer. Put key in ignition but dont turn, hold the reset button down with one hand and hold it, with the other hand turn the key to the on position (where the red lights come on but dont start), wait ten secs or so and the maint light will blink, release reset button and start car to make sure it reset, if it didn't try again.

Answer 2

If "Select/Reset" is a single button sticking out of the instrument panel: With the key off, press and hold the button. While holding the button, turn the key to "On" (don't start the engine). Continue to hold the button until the "Maint Reqd" light goes out (about 6-10 seconds).
If "Select" and "Reset" are separate buttons to the side of the instrument panel, same process as above, but pressing and holding both buttons - OR -
Turn the key "On." press and hold reset until the odometer display changes. If necessary, press "Select" until it displays "Oil Life." Press and hold reset until the display starts to flash, then release the button, and press and hold it again until the display changes to 100%.

Answer 3

turn the key to the run position, press the select reset button repeatedly until the oil life indicator is displayed, press and hold the button for at least 10 seconds, the display will flash, release and press the button for 5 more seconds until oil life reads 100%. hope this helps

Answer 4

with ignition switch in off position push the trip odometer button and hold down, now turn key to on position [while still holding down trip button] after about 5 seconds or so the maintenance lamp will start to flash let up on the trip button and you are done.

Answer 5

EXACTLY what Will S said. I have an '04, and I did the same exact thing on mine-- very easy to do, by the way. It worked.

Answer 6

By following the directions in your owners manual.

Answer 7

what Will said!