Rather than just change out parts? It's about 11 years old.I understand parts ware out.
2007-10-26 10:11:06 · 13 answers · asked by glenda w 4 in Home & Garden ➔ Maintenance & Repairs
it's up to you
sometimes its just time to get new or upgrade
check prices on a new fixture. if its too much or don't like anything then investigate repairing your current faucet
2007-10-26 13:01:29 · answer #1 · answered by TnA Inc. 4 · 0⤊ 0⤋
A faucet that new may not have washers. Most have a replaceable cartridge. The last time I replaced one it was about $11. After shutting off the water supply, remove the handle. Then remove the valve. Bring it to a hardware store and see if they have the parts to fix it. Assemble in the reverse order of how it came apart. Once you get it apart, it will be easy to see how it works.
2007-10-26 20:53:52 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I've never had a leaking facet. However, a leaking faucet can usually be stopped by replacing the rubber gasket on the valve stem. If the valve seat is corroded (usually on the hot water) it can be replaced also but finding the right one is sometimes difficult. The tool to remove the valve seat is only a couple of bucks at a hardware store.
2007-10-26 17:22:53 · answer #3 · answered by Anonymous · 0⤊ 0⤋
You can if it is not a bargain brand faucet, change the seats. After you find the valvestops, remove the handles and unwind the valve bonnet, and stem. Now you need a seat removal tool, and there are different types, mostly a hex allen type. take this with you to the home center, hardware, etc. and get an exact replacement, change the washers also. "O" ring type faucets are yet another set of problems to deal with, get an instruction book, it's well worth the headache.
2007-10-26 17:22:26 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Try taking it apart to see if it's going to be just a simple rubber washer replacement. If you do find a rubber washer at the end of the valve stem (the part that contacts the seat), take it out and take it to a home improvement store. They can help you find the right size.
If there's no washer, you might as well replace the faucet.
Oh, and make sure you turn off the water supply to the faucet before taking the faucet apart.
2007-10-26 17:25:02 · answer #5 · answered by Paul in San Diego 7 · 0⤊ 1⤋
A replacement rubber washer is going to be much less expensive than a whole new faucet. Is it just dripping from the tap? If so, I would try replacing the washer first.
2007-10-26 17:16:44 · answer #6 · answered by sallyvisualfuture 4 · 0⤊ 0⤋
Fixing a drip is usually quite simple. Depending on the type of faucet you may need to replace a "cartridge" or just a washer.
Bert
2007-10-26 17:16:03 · answer #7 · answered by Bert C 7 · 1⤊ 0⤋
Unscrew the handle that is causing the leak and replace the .25 washer first. Usually works.
2007-10-26 17:15:20 · answer #8 · answered by New Nana 4 · 0⤊ 1⤋
If it is 11 years old and never had a washer changed...might be prudent to switch it out.
If it is a washerless faucet...you will have no choice but to switch it out.
2007-10-26 17:16:10 · answer #9 · answered by Only Hams R Cured 5 · 1⤊ 1⤋
gasket or washer only. Can buy an assortment and find the ones that fits your facet.
2007-10-26 17:19:58 · answer #10 · answered by Ken H 6 · 0⤊ 1⤋