There are 7 monitors in the roomHP 1502 LCD, They keep restarting. I can see a login screen for less then a secong before it restarts again. When I have VGA unpluged it also restarts. I have tried unpluging them for few minutes, but still no change. So I know it is not computers or power cord failing. I have tried other monitors and they work fine. Also 2 of the monitors were doing the same blink and flash, when I was out of the room and came back 2 hours later they were working fine. I need to know if there is any reset I can do because I need these monitors reliable and to work.
If there is anythgin to cause these problems please let me know.
Thanks
2007-10-26 04:38:05 · 3 answers · asked by Luby 5 in Computers & Internet ➔ Hardware ➔ Monitors
Ops I spelled "restarting" wrong, it restarts
2007-10-26 05:03:56 · update #1
Dude...his computer works fine with other monitor...It is lcd monitor that blink.
According to the following link it is:-
http://www.fixya.com/support/t141769-monitor_blinking
This is a Common problem MOST if NOT ALL, problems like this with this type of fault it is invairably a problem with the Power Supply, in the PSU Electrolytic capacitors dry out and often cause this type of exact problem... It is a relitively simple fix, by replacing the caps with new ones... Any good shop should be able to fix for a modest fee.. OR if ya know anyone handy with a soldering iron maybe they could do it for you there are generally about 4 - 6 to replace... in the PS section, just do them all to be safe
2007-10-26 05:19:26 · answer #1 · answered by Mōlě 6 · 1⤊ 0⤋
well usually when they start blinking it means the lcds dieing and its time for a replacement, but with 7 at once it seems kinda strange unless they we all bought at the same time and are used roughly the same amount every day (school I'm thinking) then it could be possible that they would all burn out at the same time
2007-10-26 11:44:45 · answer #2 · answered by zspace101 5 · 1⤊ 0⤋
dude!!!! might b pc's r restarting....
if pc's r restartin @ 1 particular point then there r 2 possi.
1.ur bias battery is not workin. replace the battery OR
2.ur facing heat sink prob. if there is heat sink prob. then u have to apply heat sink paste......in betwenn processor fan n processor.....
try these solutions......
if pc's r under warranty call u r engg.
2007-10-26 11:47:34 · answer #3 · answered by Dominik... 1 · 0⤊ 0⤋