i have a wireless G Linksys PCI adapter with Speed Booster 2.4GHz, and a Linksys Wireless G Broadband Router 2.4 GHz 54Mbps.
the PCI adapter is Version 1.1
2007-10-25 09:44:11 · 3 answers · asked by Anonymous in Computers & Internet ➔ Computer Networking
You have all the right hardware. Before you get the wireless settings to work, you will need to plug in a network cable from the router to your pc. This will enable you to set up the router and configure the wireless settings. After that is done, you will be able to unplug the cable and go wireless. Make sure you install the Linksys wireless connection utility on the CD that comes with the PCI card. After installing that, the program should do a site survey, find your wireless SSID being transmitted by your router, then walk you through the setup. Linksys is very user friendly.
Click on the website that I listed as my source and it will walk you through the setup step by step. Good Luck!
2007-10-25 09:59:24 · answer #1 · answered by tzoggas 4 · 0⤊ 0⤋
Make sure that you have the software installed for the wireless modem. Read the instructions and follow them. Also before running the software do not plug the cables in. First do the software installation than plug in the cables. I just done this this morning my self.
2007-10-25 17:19:34 · answer #2 · answered by angelikabertrand64 5 · 0⤊ 0⤋
you need to check if the internal wireless card is turned off... then plug in the pci adapter.
2007-10-25 16:53:14 · answer #3 · answered by † God Bless You † 3 · 0⤊ 0⤋