if i wanted to do it myself, how would i get the tint off of my driver side and my passenger side windows?
2007-10-24 20:49:10 · 4 answers · asked by RrrrA 2 in Cars & Transportation ➔ Other - Cars & Transportation
I assume that you are talking about an after market tint job? If it is the factory tint on the windows, then you are out of luck. If it is the film tint that is put on after market, then you could use a single edged razor blade, and some soapy water. Just be careful not to cut any of the weather stripping, it gets expensive to replace them.
good luck.
2007-10-24 20:58:25 · answer #1 · answered by Fordman 7 · 0⤊ 0⤋
Its probably not the best idea to do it yourself. You could damage the windows and fixing that would end up costing more than actually paying someone to take it off in the first place. I had to take the tint off of my front windows, i went down to a tinting place and they did it in about 10 minutes for about $15AU. Totally reccommend paying someone to do it!!!
2007-10-25 03:59:30 · answer #2 · answered by dobley_88 1 · 0⤊ 0⤋
Use a razor blade, edge it diagonally then make a small slit. Just use your hand to rip the other parts off. Just be careful not to damage the rubbers or scratch the glass itself. Good luck.
However, I highly suggest you go to the nearest auto shop and have them do the job. It's safer, and it's not that expensive.
2007-10-25 04:16:07 · answer #3 · answered by mikeee A 2 · 0⤊ 0⤋
use a razor blade.
2007-10-25 03:51:51 · answer #4 · answered by less 6 · 0⤊ 0⤋