Hi, I am looking to see if such a cable exists. I have seen plenty of leads that convert a Molex Plug to an SATA plug but I need the other way around. My scenario is this that I got a new PC and all the power plugs coming out of the PSU have only SATA power plugs and no Molex plugs at all and I don't want to go changing the power supply unit just to get one with both. I have this perfectly good IDE DVD Writer I want to put into the case and I have found an adapter cable to convert the DATA part from IDE to SATA no problem there but what do I do about power for the IDE DVD Writer if all the power cables coming out of the PSU are SATA only?
Thanks in advance for any ideas.
Andy.
2007-10-24 11:22:16 · 2 answers · asked by Andy - from Ireland 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Here you are:http://www.cooldrives.com/4mooufrsapoc.html
2007-10-24 11:28:31 · answer #1 · answered by Anonymous · 3⤊ 0⤋
Motherboard would not furnish that connector for the video card. the potential furnish does. Take the factor panel off and notice if it has one. Can continuously use a 4/6pin adaptor. maximum retail enjoying cards comprise one. purely be certain you have adequate watts and +12V amps on the PSU to run the hot card. an excellent variety of video card enhancements require an improve for the potential furnish besides.
2016-11-09 09:44:15 · answer #2 · answered by purifory 4 · 0⤊ 0⤋