the whitish shade has been masked over by bluish shade
when i unplugged the monitor signal cable
all the three colour bars on the screen could be distinctly seen
2007-10-23 21:20:57 · 3 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Monitors
Make sure no one has been playing with the colour point settings in the monitor. There should be a reset to default option.
- - a lower (cooler) colour temperature is redder.
Make sure that you did not bend any of the pins in the connector when you re-plugged it.
Make sure that the connector is well seated and screwed down.
If you have a CRT then sometimes and arc in the tube can mess up the settings.
2007-10-24 09:55:17 · answer #1 · answered by Simon T 6 · 0⤊ 0⤋
Look in your monitors menu there may be a colour temperature setting and you can adjust the overall hue to be a little warmer.
2007-10-23 21:31:48 · answer #2 · answered by Mike C 6 · 0⤊ 0⤋
looks like u reset the pixels by mistake in the settings
2007-10-23 21:31:29 · answer #3 · answered by itsme 4 · 0⤊ 1⤋