Plz explain it soon for me
2007-10-22 00:00:39 · 4 answers · asked by ahmed w 1 in Computers & Internet ➔ Computer Networking
They say a picture is worth 1000 words. SO here is the picture for you.
http://www.duxcw.com/digest/Howto/network/cable/cable5.htm
It is much easier than trying to explain in words.
Basically you make pin 1 ---- pin3 pin 3 --- pin 1
pin2 ---- pin 6 and pin 6 --- pin 2. by Crossing the orange whit/orange and green white/green pairs in the ethernet cable. You "swap" locations on the opposite connector.
2007-10-22 00:13:19 · answer #1 · answered by Tracy L 7 · 0⤊ 0⤋
There are 4 pairs of wire in CAT cable.
Here is link read and try it.
2007-10-22 07:12:56 · answer #2 · answered by Amit 2 · 0⤊ 0⤋
pin1 - pin3
pin2- pin6
pin3-pin1
pin4-pin4
pin5-pin5
pin6-pin2
pin7-pin7
pin8-pin8
cross cable connect is only have 4 active cables...
apart from this choose best crimper - may b in first attempt itself u r goin to get good cable...
all the best...
2007-10-22 07:19:26 · answer #3 · answered by Neel 1 · 0⤊ 0⤋
there you go
http://www.makeitsimple.com/how-to/dyi_crossover.htm
2007-10-22 07:11:12 · answer #4 · answered by Anonymous · 0⤊ 0⤋