2007-10-19 06:28:11 · 6 answers · asked by Al 2 in Home & Garden ➔ Do It Yourself (DIY)
If the leak is coming from the back of the shower head then remove it from the pipe coming through the wall and wrap Teflon tape around the threaded end of the pipe and reinstall the head. Teflon tape is available at every hardware and home center usually for under $2.00. If this doesn't work then replace the head. There is a big differance between the shower head and the shower valve.
2007-10-19 09:07:16 · answer #1 · answered by THOMAS D 2 · 0⤊ 0⤋
Turn off the mains supply. Or buy a new shower head.
2007-10-23 00:55:14 · answer #2 · answered by MuffDvr 3 · 0⤊ 0⤋
Replace the rubber O rings or washers in the valve body or just install a new valve. Have a good day!
2007-10-19 06:43:27 · answer #3 · answered by Parercut Faint 7 · 1⤊ 0⤋
Give the 10 to paper cut
2007-10-19 07:25:48 · answer #4 · answered by DIY Doc 7 · 0⤊ 0⤋
you probable might desire to interchange the seal or washer on the valve the place you turn on the bathe. If there is likewise a leak on the faucet it would desire to be the washer on the nice and comfortable or chilly water valve
2016-12-29 18:19:30 · answer #5 · answered by ? 4 · 0⤊ 0⤋
Check and replace the washers or seals.
2007-10-19 14:49:03 · answer #6 · answered by Anonymous · 0⤊ 0⤋