How do I set up my sewing machine???

Question

ok. so my clothes keep RIPPING and im getting frustrated with sewing everything from hand so can someone please tell me how to set up a sewing machine. like how do you get it to work, and where do you put the string on the machine and stuff...im CLUELESS on how to use it. so please give me easy step by step instructions. thanks.

Answer 1

Having struggled for years with an old machine with no instructions I know how you feel. However you should be able to obtain these from the maker. You don't say which make of machine yours is. This information is vital to the operation of your machine. One thing must be emphasised on ALL machines there must be a LIGHT coating of Sewing machine oil. But please persist the rewards in personal satisfaction is enormous

Answer 2

Katie, if your clothes keep ripping, they don't fit you properly. That's probably the first thing to address. Current fashion seems to be beyond skin tight, with stress-marks across the fabric. That's really not at all good for clothes longevity, nor for your body long term... you can actually start seeing perma-dents in the flesh from this sort of fitting problem.

As far as sewing machines, you need to get out the machine manual and figure out the parts and thread up the machine systematically, start to finish. Besides the manual, you'll probably want a couple of sewing books to help -- the two I think might be most useful to you are Simplicity's Simply The Best Sewing Book and the Readers' Digest Sewing Book, both of which can be found used for a small sum, or borrowed from your library. The pictures and diagrams are going to mean much more to you than a verbal description on the net.

Answer 3

Since you have the internet use, look up the make of the sewing machine and instructions on how to thread it properly. You'll be amazed at what information you can get on the internet. There will no doubt even be a picture of the machine and the how to's....

Answer 4

I would advise a beginner not to try to use a machine that doesn't have a manual. If you have an old machine, chances are it hasn't had a yearly cleaning and won't work properly anyway. Pay the $90.00 for a new machine in a department store so you can have a manual to go by. The manual will show you a threading diagram and explain how the machine works.

Or you could take an old machine to a repair person and ask them to sit with you can show you how to use that particular machine - but without the written instructions, it's easy to forget what they showed you.
.

Answer 5

hi, first if your machine is new all the settings will be correct. all you have to do is tread the machine from the top using your manual and wind a bobbin, which goes underneath the sewing bed plate and your set to sew. first sew on scrap fabric to ensure your stitches are correct for that particular fabric and go to town.

Answer 6

Try this link and scroll down until you find your make of machine . It is really helpful for troubleshooting problems as well. Make sure you use a new needle the right size for your fabric and never use cheap thread as it usually breaks causing you much frustration . Good luck!

Answer 7

that's an fairly decrease priced and occasional high quality sewing gadget. Many problems with the rigidity. i does not have faith it to stitch any garment i exchange into going to positioned on. very undesirable comments for it. maximum pronounced it exchange into valueless. See website below to string the gadget and wind the bobbin

Answer 8

READ the instruction manual. DUH? If you are as "clueless" as you say, perhaps you'd do better to buy ready made clothing.