I have a Brother Bicor VX1005 sewing machine. I can't figure out how to thread the bobbin. I was able to track down a manual for the machine, but the manual is confusing and the pictures are not very detailed. I've already wound the bobbin and put it into the case. The manual says the next step is to "pull thread into notch, draw it under tension spring and back into slot". I found the notch but where is the tension spring? The manual doesn't say and the picture is no help at all. I tried looking on Brother's website already but this is an old machine and there's not any information about it on their site. Does anybody else have this machine that could give me a little more detail?
2007-10-16 08:30:26 · 4 answers · asked by Amethyst80 1 in Games & Recreation ➔ Hobbies & Crafts
The notch, spring and slot are all on the side of the little bobbin case. On mine, all you can see are the notch and the slot. Just make sure the thread goes all the way into the slot and pull on it a little to make sure the thread comes out smoothly. Then you pop it into the machine and go to the next step.
.
2007-10-16 08:44:06 · answer #1 · answered by Kacky 7 · 1⤊ 0⤋
Threading A Bobbin
2016-10-01 11:03:09 · answer #2 · answered by pizzaro 4 · 0⤊ 0⤋
If it's the sort of case I'm thinking of, it'll work like this:
http://www.thru-hiker.com/workshop.asp?subcat=11&cid=13
2007-10-17 11:35:39 · answer #3 · answered by Anonymous · 0⤊ 0⤋
here's a link for you . Just scroll down till you find your machine type.
2007-10-16 09:16:46 · answer #4 · answered by Donna 7 · 3⤊ 0⤋