I got the stubborn TORX set screw out from the inside of the chuck. I was told to lock a allen wrench, the one with a short 90 off it and then hit with a hammer.
a) How do i get this chuck off the spindle?
2007-10-15 17:29:44 · 5 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
DeWalt.com.....Parts; Service; trouble shooting; etc.
While I can't imagine an allen wrench being of much use; you might try JUST the Hammer.....UNLESS your model has a THREAD ON CHUCK.
2007-10-16 00:15:11 · answer #1 · answered by DIY Doc 7 · 0⤊ 1⤋
Nothing wrong with the method you are using, try hitting the Allen wrench clockwise, it's probably a left hand thread.
2007-10-16 17:14:54 · answer #2 · answered by Carpenter 3 · 0⤊ 0⤋
You should reinstall the torx but don't tighten it and then tap it with a hammer so you don't ruin the threads.
2007-10-16 08:18:52 · answer #3 · answered by Anonymous · 0⤊ 0⤋
clamp the chuck in a vise and tap the drill off.
2007-10-16 01:31:39 · answer #4 · answered by richpena2 2 · 0⤊ 0⤋
I think you need to re-ask you question so that it makes more sense. Can't understand it.
2007-10-16 01:17:46 · answer #5 · answered by kingsley 6 · 0⤊ 1⤋