iv just renewed all part off the top end off my kawasaki kmx 125 engine?

Question

dus any one know what other parts if any may need renewing aswell . it was the top end off my bike that i had probs with i renewed the piston and rings a new conrod kit a new barrel all gasgets and seals so thats all good now.. this is a 2 stroke bike i hope any one can help cus i dont really wont any more probs with me bike

Answer 1

Always give "year", make, engine size and model # when asking questions. We need all of that info to give an informed answer.
If your engine has a power valve, de-carbonize it.
Did you change the crank bearings and seals while the engine was apart.
You should have.
Change the reed valves.

Answer 2

What problem were you having? As Guardrail says please give us some more details and hopefully when you did the con rods you did all the crank seals etc.

A 2 stroke is pretty simple and you have covered most of it but if it was a running problem you had then remember that that they are sensitive to good set up on the carb etc, no air leaks so make sure that too is all sorted.

As I say what was the problem?

Answer 3

sounds like you got it covered to me. good luck