I have moved house recently where there is a burglar alarm with the numbers 9450 but no brand name on the front panel. I know how to set the alarm as i was given the code by past owners but as i have just adopted a cat, i want to know if i could just set the door sensors and not the room sensors. I dont know what each zone is set at and there is no manual. The past owner doesnt have a clue, it wasnt put in by them. Any advice?
2007-10-13 08:03:03 · 4 answers · asked by MysticMaiden2000 3 in Home & Garden ➔ Other - Home & Garden
no my alarm code is not 9450, thats the model type of the alarm! I was mentioning that there is no brand name just that number where a name should be!
2007-10-13 09:10:26 · update #1
yes its a scantronic 9450, if i omit all zones (1-3) will this leave me with just the door sensors?
2007-10-13 11:21:49 · update #2
Sounds like a Scantronic...You can omit the PIR's if you want to.......http://www.securitycentres.co.uk/Manuals/9450.pdf
ADDED>> It depends which zones the PIR's are on?! If you omit all zones you will be left with the front door only, do you have a back door? To save omiting every time you set the panel, you would be better fitting 'Petsmart' PIR's or shorting out the PIR's alarm terminals.
http://www.visonic.com/VisonicHomePage.nsf/sysProductActiveByName/96F196A0EC93BA44C2256C220057DFF0?OpenDocument
2007-10-13 09:52:10 · answer #1 · answered by jayktee96 7 · 0⤊ 1⤋
Either get the old sensor out and reinstall it or call the alarm company for service.
2016-03-12 21:17:45 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Don't put your personal security numbers on here, someone can befrend you, find where you live and use it.
2007-10-13 08:13:16 · answer #3 · answered by Anonymous · 0⤊ 1⤋
just disconnect mains to it-------------or get electrician to do it
2007-10-13 08:21:21 · answer #4 · answered by Anonymous · 0⤊ 1⤋