Should the light in an above ground pool be removed when you close it for the winter? And why?

Answer 1

If it is one of the Aqua Luminator lights (the one that goes through the return), I would remove it. (just the bulb assembly) This can be done with leaving the through-the-wall return fitting in place.

Even if it is a through-the-wall fitting (separate from the return), it could be subjected to ice damage (if it freezes where you are); but since most of the fixture should be outside of the pool (not in the water), you'll probably be ok to leave it in. (Usually the lens is the only occasional casualty here.)

Answer 2

If it is an installed light (below water level) there is no reason to remove it. You could mess up the seal by doing so. Most above ground pools need only to be drained below the strainer/overflow basket.

Answer 3

"We in basic terms thoroughly drained our pool that got here with the living house and cleansing it thoroughly earlier including water in it," in no way completely drain an above floor pool. that's no longer the way you sparkling a pool to apply it. Run the pump, ask your self it, stability Ph + chemistry, ask your self returned, and by ability of now it could be clearing. Get help out of your close by pool shop once you're having problems. "is it going to be risk-free to maintain it empty for the wintry climate? " Noooo! Above floor swimming pools stay upright from the burden of the water pressing against the climate. a powerful windstorm will bend the partitions inward, destroying it. top off right now, a minimum of to the backside of the skimmer. Run the pump and winterize it. regularly the winterizer kits contain a copper compound which keeps algae develop below administration. save the pump working numerous days to combination all the chemical compounds nicely. conceal. be beneficial conceal is tight to keep away from a baby/puppy from falling in and getting trapped. Unplug and drain filter out. in all probability open your hoses (or disconnect them altogether to guard against freezing) a powerful pool shop can help you alot.

Answer 4

I agree with previous answers: if it is a thru-the-wall light, it is likely designed to withstand freezing. If it is like mine, which is simply and add-on light that hangs from the pool wall to below the water line, remove it or drain water below the light. This is what my light manufacturer recommends. If you have doubts, contact your pool installer and/or the light manufacturer.