My washing machine stops twice during the cycle. On each ocassion I have to turn it off, turn the dial full circle, and turn it on again- then it continues at the point where it left off. I've checked the drainage and this is not the problem. Is it time I bought a new machine or is the problem mendable?
2007-10-12 01:36:07 · 9 answers · asked by Peace 2 in Home & Garden ➔ Cleaning & Laundry
if you could say at what point the washer stops i could help you more it doesn't sound like it's that much and it's not your timer
2007-10-12 05:03:41 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Personally i'd get the drainage problem sorted regardless, and if it helps your washing machine too work then you've won a watch, however the fact that your drainage is blocked there is a good chance you have burned out the pump that drains the water away, and maybe that's why the dial keeps stopping. If you get the drainage sorted and it still doesn't work i'd replace the machine, as they are really made to throw away these days anyway, and getting in a repair man can often be more expensive than getting a new machine. Al....
2016-04-08 05:02:19 · answer #2 · answered by ? 4 · 0⤊ 0⤋
The cycles on your machine are controlled by a timer.Sounds like the timer is worn out. If the machine isn't too old, go to an appliance repair shop with your old timer, and they will sell you one they have in stock. You can also go to a shop that specializes in your make of machine, and they will get you one. Just change the timer. As you remove the wires on the timer, make a schematic of what wire goes where, so you can reinstall the new one correctly!!
2007-10-12 01:55:22 · answer #3 · answered by Rawstuff 007 3 · 0⤊ 0⤋
I would at least have a repairman out to look at it. They can give you an estimate for the repair. To me, it sounds like you just need a new knob. It might just even be a loose wire in the knob itself.
Sears offers repair services as does most appliance stores. Call around and ask what a visit would cost you. A new machine would cost you at least $500, so I think it would be beneficial to have a repairman fix this problem.
2007-10-12 04:26:22 · answer #4 · answered by nellbelle7 5 · 0⤊ 0⤋
You do get people who mend washing machines you can find them in the yellow pages but often it's more economical to buy a new one. However if you still have the user's manual you can check in there to see if there's anything else you can do yourself to help correct the problem. But it may be time for a new machine!
2007-10-12 01:44:46 · answer #5 · answered by Jude 7 · 0⤊ 0⤋
It sounds like you might have a bad solenoid in your timer or a bad water level switch. This item is cheap to fix and I would recommend getting this replaced before going out and spending hundreds of dollars for a new washing machine. With parts and labor, you probably could get this fixed for $50.00.
2007-10-12 01:58:48 · answer #6 · answered by inspector4homes 3 · 0⤊ 0⤋
Sounds to me like it has a corroded wire in the machine, have a mechanic check it out.
2007-10-12 01:44:59 · answer #7 · answered by trey98607 7 · 1⤊ 0⤋
no washing machine is worth mending these days, years ago they were made to last but now if you get 3-4 years out of it your lucky.
2007-10-12 01:39:55 · answer #8 · answered by Anonymous · 0⤊ 1⤋
mine did something similar and luckily i had it under warranty. all the engineer did was open the filter and tip it forward and out came some loose change. it worked perfect after that although you never can tell with these things.
2007-10-12 01:46:56 · answer #9 · answered by Anonymous · 1⤊ 0⤋