Well, the normal setting is to have at least two name servers. Preferably on different class C networks! You do need to use two public IP's (one for each nameserver).
So yes you need to use two nameservers.
If you want to see how that works check
http://dnsstuff.com
And here is a good article on DNS
http://www.garykessler.net/library/dns.html
2007-10-09 03:53:07
·
answer #1
·
answered by Tracy L 7
·
0⤊
0⤋
By all means yes! In fact, providing multiple name servers is standard practice, which allows the failure of one server without the loss of DNS for your domain.
However, I would check with your domain register about your need for name servers. Unless you run a large domain, they will usually provide multiple name servers for you, and if you do run a large domain they will usually run a secondary name server for you.
For information on DNS, I would suggest that you obtain the "DNS Bind Cookbook". It explains how to configure BIND to do all this stuff.
2007-10-09 04:03:01
·
answer #2
·
answered by Bob 1
·
0⤊
0⤋
ofcourse you can, in default there are 2 field for nameserver , its ns1 and ns2. even if you only have 1 nameserver , you can input same address in ns1 or ns2. no problem at all
hope can help you
2007-10-09 03:58:10
·
answer #3
·
answered by kirlein 2
·
0⤊
0⤋