My kitchen needs a face lift! Cabinet question.....?

Question

I have 2 cabinet doors that I don't want to replace, but instead put glass in them.. Where do I even start?

Answer 1

ok most doors are built, in 5 bits, the middle panel is wood very light ply ,
cut this out , and replace with glass. you will need, a little saw ,some glass, and make sure you dont breck the , rest of the door , i would use silcone , to help stick the glass.
THIS OLD HOUSE,COM is worth looking at

Answer 2

Cut out the inner panel and replace it with glass. You can either hot glue the glass or use the little push points that you get at the hardware store (this is more advisable).

You might try HGTV.com or someplace like that for pointers.

Answer 3

Find a glass or kitchen store in your area.
Take the doors off, & give them to them.
Usually, it's a simple operation to replace the panel.
If the doors are solid, they can make glass ones.

Answer 4

Either take them to the glass company or to a cabinet refacer. They will take your door & redo it. This is not a time for a sloppy job.

Answer 5

first you get same one that know about cabinets. estimate the cost of the cabinet.time you neat mack the cabinets quality of cabinet.or you can go to the store( lows) or home depot)they have, Raddy made cabinets pick Wat you lick and then as ck them for installlation's.they will provide some one to tack a measurement and they will instal them