2007-10-07 15:59:42 · 6 answers · asked by Tabonie 4 in Home & Garden ➔ Do It Yourself (DIY)
Try a box end or an open end wrench if clearances won't permit either use a socket wrench. Turn in the same direction as removing a light bulb. Install a new sparkplug and tighten only a little tighter than snug.
2007-10-07 17:51:23 · answer #1 · answered by luther 4 · 0⤊ 0⤋
You will need a deep well socket the size of the plug, theres 2 sizes so i'm not sure which you need. But the plug turns counterclockwise of a clock rotation to remove it. Check the gap on the new one befor putting in. tighten new plug real snug but don't play super woman or you strip out the threads. Hope this helps.
Jim
2007-10-07 23:12:44 · answer #2 · answered by hotvw1914cc 6 · 0⤊ 0⤋
get a socket wrench you have to make sure that you have the right size socket you only have two sizes,locate the spark plug usually in the front of the engine,turn the socket so that it removes,turn i left,remove the plug install a new one,really easy good luck
2007-10-07 23:10:43 · answer #3 · answered by thomasl 6 · 0⤊ 0⤋
TWIST OUT OLD TWIST IN NEW
13/16 OR 5/8 DEEP WELL SOCKET
2007-10-07 23:11:29 · answer #4 · answered by mel7996 3 · 1⤊ 0⤋
Throw it in the trunk of your car, take it to Auto Zone and ask for help. They will probably change it for you. the watch how it's done
2007-10-11 21:31:21 · answer #5 · answered by James 5 · 0⤊ 1⤋
out with the old in with the new and done
2007-10-07 23:12:56 · answer #6 · answered by fatty o 2 · 0⤊ 0⤋