I try the silders in the OC screen and put it up like 2 MHz (just to test it out). I enable the funtion and when i restart, my comp doesnt go past the Windows XP loading screen. My system is very cool ( my CPU runs at 34 degress at rest); what other factors may be present? Why does this happen?
2007-10-07 10:34:53 · 5 answers · asked by gufffaa88 2 in Computers & Internet ➔ Hardware ➔ Desktops
http://www.guru3d.com/article/article/449/1
that should help you out but before you even try to oc anything, make sure you know everything, and i mean EVERYTHING. know what you doing and how you're gonna do it before you attempt. ocing runs the risk of seriously screwing up your gpu.
2007-10-07 10:41:18 · answer #1 · answered by T 4 · 0⤊ 0⤋
Hi. Start out with the slowest speed increase possible, as with any over-clocking. Make sure to check the "Start with Windows" or similar. Hit the fastest then back off a bit. Have fun!
2007-10-07 10:39:13 · answer #2 · answered by Cirric 7 · 0⤊ 0⤋
T is right on. Also dont up the voltage on your card unless you dont mind paying for a new video card cuz thats the best way to fry a video card.
2007-10-07 10:51:29 · answer #3 · answered by s j 7 · 0⤊ 0⤋
Hi there,
Get one of the latest versions of Rivatuner. Free link http://bit.ly/1k3HrZ5
Try it out
I hope it helps
2014-07-24 09:59:42 · answer #4 · answered by Anonymous · 0⤊ 0⤋
you are able to push the cardboard all you like (watch temps and test for artifacts) yet your nonetheless going to be limited by skill of the cpu/memory on that gadget. you will see the actual ability of that card with suitable motherboard/cpu/memory.
2016-10-21 09:08:21 · answer #5 · answered by ? 4 · 0⤊ 0⤋