i am using a GIGABYTE motherboard!
i had it since nov of 2003, the model number is GA-7VT600
its KT600 motherboard (K7 triton series)
you can view Gigabyte motherboards here:
http://www.gigabyte.us/
2007-10-07 06:10:37 · 7 answers · asked by Anonymous in Computers & Internet ➔ Other - Computers
I have built computers with Gigabyte and didn't like it. I am currently using ASUS, but it is really fussy with the BRAND of RAM that is used.
I have also used Intel, Tyan (which I liked during the PIII years), ABIT, PCCHIPS, Shuttle and a few other brands.
The best computer that I ever configured was BioStar. It was SWEET, and worked with every brand of memory that I plugged in. (and I plugged in some weird stuff).
Good luck and Happy Computing!
- oh, I see that we have another ASUS P4P800 SE. That's what I am using.
2007-10-07 06:19:13 · answer #1 · answered by Anonymous · 2⤊ 0⤋
maximum motherboards incorporate a instruction manual and a CD which has each and every of the drivers for the chipset and contraptions put in on the motherboard (contained interior the various chips). Ask your broker what you acquire and if no longer then open the case and seek for the writing on the motherboard. there is many times an identifier code close to the PCI slots like GA-N700R or some thing alongside those lines. additionally seek for a FCC style. you could then do an internet seek for the maker. Realtek NIC (community interface card) subsequently a chipset, is many times put in with the motherboard drivers. so which you will desire to basically would desire to acquire the driving force set from the mfr of the motherboard and do the deploy for the realtek nic. If the living house windows information is telling you the chipset for the realtek (eg: 8139) then you somewhat basically desire that driving force to set it up. somebody you be attentive to would have this driving force and accessible on line.
2016-12-14 10:08:57 · answer #2 · answered by meran 4 · 0⤊ 0⤋
I have never been tempted to open the computer and look in there to get that info. Even when I change memory or add peripherals that question never came up.
This computer is an HP and it gives me no grief so I never mess with its motherboard.
I once had a contract in which I provided on-site warranty support for a room full of Gateway high-end desktops. Their motherboards always were failing so I was always troubleshooting them with their help desk and pulling them so that Gateway would send the replacement the next day. But even there I never was tempted to read the motherboard's details.
2007-10-07 06:16:20 · answer #3 · answered by Rich Z 7 · 0⤊ 1⤋
It doesn't make a difference these days on what type of motherboard you use. Since 1 company in china may manufacturing different brands of m/b.
What makes it different is type of processor you want to use. If you are AMD fan then you have different specs. compared to Intel based motherboards.
2007-10-07 06:16:39 · answer #4 · answered by Manny 2 · 0⤊ 2⤋
ASROCK DUAL SATA-2 939 AMD board
Kinda shitty, but I was poor when I built this PC
2007-10-07 06:17:42 · answer #5 · answered by Trash 4 · 0⤊ 1⤋
I've got an MSI K9N Platinum in this rig.
2007-10-07 06:13:55 · answer #6 · answered by Crypt 6 · 1⤊ 1⤋
ASUS P4P800 SE
2007-10-07 06:13:04 · answer #7 · answered by mephisto 5 · 1⤊ 1⤋