2007-10-07 05:21:50 · 4 answers · asked by Lisa W 1 in Cars & Transportation ➔ Motorcycles
first just try giving it a clean out and a good squirt of WD40
2007-10-07 05:26:00 · answer #1 · answered by Anonymous · 0⤊ 1⤋
Always give year, make, engine size and model # when asking questions. We need all of that info to give an informed answer.
That model isn't available in the United States.
From pictures on the web, I've only seen them with drum brakes.
Use this bike for an explanation. -
http://www.bikebandit.com/parts
Go to - Honda - 2000 - XR100 - Rear Brake
#4 is the brake cam
The cam turns when the brake pedal is pressed, then spreads the shoes apart.
The cam gets corroded and rusted, where it goes through the brake panel.
Remove the brake panel from the bike and tap out the brake cam.
Sand it smooth with sand paper and clean the hole in the brake panel.
When they're both cleaned properly, the cam should spin in the hole freely.
2007-10-07 13:05:46 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋
If you have drum brake change cylinder, for disc brake change caliper piston.
2007-10-07 18:44:53 · answer #3 · answered by interceptor 2 · 0⤊ 1⤋
You need to replace your brake shoes...
2007-10-10 04:52:15 · answer #4 · answered by barfoeng 4 · 0⤊ 0⤋