I had an error message saying "checksum error. CPU may have been changed". I could bypass this by just pressing F1. To remove this message i loaded fail-safe defaults, however after that i got stucked to a black screen immediately after the second page before Windows XP logo appears
2007-10-07 02:52:57 · 3 answers · asked by kk 1 in Computers & Internet ➔ Hardware ➔ Desktops
hi computer guy. Actually it's not my pc but i know that CPU has not changed. what i exactly made is that i loaded fail-safe defaults and after that i got the black screen
2007-10-07 03:43:33 · update #1
hi william. yes i loaded fail-safe defaults which in turn should affect the BIOs settings
2007-10-07 03:46:12 · update #2
Hi,
Have you been touching your BIOS settings ???
2007-10-07 02:57:09 · answer #1 · answered by Anonymous · 0⤊ 0⤋
On the mobo is a BIOS Clear jumper. it will be a three pin header with a jumper between two of the three pins. Move the jumper to the center and normally open position, then put it back where it was originally. This should clear any BIOS setting that is causing a problem.
Good Luck
2007-10-07 03:45:24 · answer #2 · answered by Ernie B 7 · 0⤊ 0⤋
Have you swapped your CPU?
2007-10-07 03:07:59 · answer #3 · answered by Computer Guy 7 · 0⤊ 0⤋