Another heat pump question......?

Question

Is there a web site I can go to to see a wiring diagram on a Goodman model # PH-030-1A heat pump...I need as much info I can get on this unit as I will be installing it in my home....Any info will be appreciated !!!

Answer 1

i can tell you here.
you ll need to install 8 wire from your stat to your air handler. you ll only use 6 of those wires.
yellow on yellow---white on white---red on red and keep the jumper wire in---brown will goto E---orange to orange---green to green.

there will be a little black swith inside the stat, it ll say O/B. make sure its on O. if not , you ll always get heat no matter your setting.

now for your air handler to heat pump wiring its a whee more difficult.

inside your air handler, do the following:
tie all three reds
tie all whites and browns together. that ll give you your emergency heat when needed. that ll be 5 wires total.in that bundle.
tie the three blues
tie orange from stat(8 wire) to heat pump orange (5 wire)
tie yellow from stat to yellow air handler wire.
tie green stat to green air handler.
there will be a couple colored wires left, dont worry about them.

now to your outside unit, you ll have 5 wires coming from your heat pump. match all colors to each other and sometimes to have 2 wires different left(usually green and orange) tie them. for some reason some 5 wire doesnt have orange so like i said, when you match all like colors, there may be 2 odd balls. tie em.

that should do it. sounds a bit complicated, but you should do fine if you were handy enough to soldier the line sets for the heat pump and all.

good luck. ps if you accidently cross a wire or something, worst you ll do is blow the 3 amp fuse or it wont come on. make sure you use 3 amp, otherwise you ll fry your 24v stepdown tranformer if you mess up. i know this from experience

Answer 2

Goodman Heat Pump Wiring Diagram

Answer 3

This unit is discontinued, Goodman has moved to model number GPH1336H21A for their package heat pumps. You can download the GPH manual from the website, or if you already have the PH030, the wiring diagram should be on the inside of the access door inside the unit.

Answer 4

Here is a link to instructions for Goodman Heat Pumps in general (does not contain internal wiring diagram).

http://www.alpinehomeair.com/related/GPC13-Series%20Installation%20and%20Operating%20Instructions.pdf

Sorry, could not locate an internal wiring diagram for Goodman Heat Pumps.

Here is the link to contact Goodman. They may be able to supply you with the internal wiring diagram and a component list.

http://www.goodmanmfg.com/Home/AboutGoodman/ContactUs/tabid/156/Default.aspx

Good Luck.

Answer 5

This should not be a DIY project. You could seriously hurt yourself or at very least damage the unit and pay hefty to repair/replace.