Example:SAE1030,SAE1040
2007-10-06 11:29:33 · 3 answers · asked by jungltiger 1 in Cars & Transportation ➔ Maintenance & Repairs
Most people like to change their oil themselves and save money. The problem is that today's cars are more complicated and many people are intimidated. You can get specific oil change directions and other repair procedures online instantly from ALLDATA. You can even print out the directions and not worry about getting oil all over them ! I also have a large selection of auto repair manuals in my online shop, Click Here to check them out.
I receive a lot of questions regarding oil and the least understood part is the number system used to rate oils.
Oil weight, or viscosity, refers to how thick or thin the oil is. The temperature requirements set for oil by the Society of Automotive Engineers (SAE) is 0 degrees F (low) and 210 degrees F (high).
Oils meeting the SAE's low temperature requirements have a "W" after the viscosity rating (example: 10W), and oils that meet the high ratings have no letter (example SAE 30). An oil is rated for viscosity by heating it to a specified temperature, and then allowing it to flow out of a specifically sized hole. Its viscosity rating is determined by the length of time it takes to flow out of the hole. If it flows quickly, it gets a low rating. If it flows slowly, it gets a high rating.
Engines need oil that is thin enough for cold starts, and thick enough when the engine is hot. Since oil gets thinner when heated, and thicker when cooled, most of us use what are called multi-grade, or multi-viscosity oils. These oils meet SAE specifications for the low temperature requirements of a light oil and the high temperature requirements of a heavy oil. You will hear them referred to as multi-viscosity, all-season and all-weather oils. An example is a 10W-30 which is commonly found in stores. When choosing oil, always follow the manufacturer's recommendation.
2007-10-06 11:35:06 · answer #1 · answered by hermitofnorthdome 5 · 1⤊ 0⤋
Society of Automotive Engineers
10/30-10/40 almost the same. 10/40 a little bit thicker. Both are all around good oils used by most cars.
20/50 is thicker for heavy duty applications.
2007-10-06 11:43:24 · answer #2 · answered by ted j 7 · 0⤊ 0⤋
Simple explanation.
10W-40
10W = the viscosity at 32 deg. F
40 = the viscosity at 212 Deg F.
2007-10-06 11:42:31 · answer #3 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋