English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have a leak that comes and goes in the room above. I've fixed the leak but it left it's mark.

The mold is coming thru the last paint job from the last leak.

2007-10-06 03:36:05 · 12 answers · asked by Anonymous in Home & Garden Maintenance & Repairs

12 answers

if the mold is on the inside of the wall the sheetrock should be replaced but if it is just on the outside of the wall you can wash i with bleach water a 50/50 salution is strong but efective ,try the bleach and water first if it comes back you need to remove the sheetrock and replace it

2007-10-06 03:41:19 · answer #1 · answered by nutnnice69er 3 · 1 1

Molds will grow and multiply
whenever conditions are right—
sufficient moisture is available and
organic material is present. Be on the
lookout in your home for common
sources of indoor moisture that may lead
to mold problems:
• Flooding
• Leaky roofs
• Sprinkler spray hitting the house
• Plumbing leaks
• Overflow from sinks or sewers
• Damp basement or crawl space
• Steam from shower or cooking
• Humidifiers
• Wet clothes drying indoors or
clothes dryers exhausting indoors
Warping floors and discoloration of
walls and ceilings can be indications of
moisture problems. Condensation on
windows or walls is also an important
indication, but it can sometimes be
caused by an indoor combustion
problem! Have fuel-burning appliances
routinely inspected by your local utility
or a professional heating contractor. If you think that there is still mold inside your walls, get it checked as soon as possible. Some frequently asked questions and answers are below:
HEALTH EFFECTS
What symptoms are
commonly seen with mold
exposure?
Molds produce health effects
through inflammation, allergy, or
infection. Allergic reactions (often
referred to as hay fever) are most
common following mold exposure.
Typical symptoms that mold-exposed
persons report (alone or in combination)
include:
• Respiratory problems, such as
wheezing, difficulty breathing, and
shortness of breath
• Nasal and sinus congestion
• Eye irritation (burning, watery, or
reddened eyes)
• Dry, hacking cough
• Nose or throat irritation
• Skin rashes or irritation
Headaches, memory problems, mood
swings, nosebleeds, body aches and
pains, and fevers are occasionally
reported in mold cases, but their cause is
not understood.
How much mold can make
me sick?
It depends. For some people, a
relatively small number of mold spores
can trigger an asthma attack or lead to
other health problems. For other
persons, symptoms may occur only
when exposure levels are much higher.
Nonetheless, indoor mold growth is
unsanitary and undesirable. Basically, if
you can see or smell mold inside your
home, take steps to identify and
eliminate the excess moisture and to clean up and remove the mold. I work for an environmental laboratory. If you have any more questions, let me know.

2007-10-06 04:39:35 · answer #2 · answered by GadgetGirl004 2 · 2 0

Marelene i think of your in basic terms selection is to take the floor up and reinstall it. initiate the place the final piece grew to become into put in and artwork your previously till this is all bumped off. i'd mark the products the place they got here from and positioned decrease back in comparable region. comedian strip out on sheet of paper. To get a specialist finding interest the baseboard molding must be bumped off. If the baseboard molding is to confusing to do away with. you are able to continually bypass away room for expansion at baseboard molding and purchase quarter around molding to cover. this would artwork. once you're a single mom without adventure with around observed, i'd reccomend you purchase much low priced jig observed and get high-quality the enamel blades for reducing off the ends to shorten as quickly as you have bumped off the floor. The jig observed will decrease laminate without problem and is lots safer while you're biginner. solid success

2016-10-21 05:36:46 · answer #3 · answered by ? 4 · 0 0

There is a fungicide that you can spray on this. Some of this may not come out and you may have to replace the drywall if the drywall is not mold resistant. That is why so many in New Orleans had to be replaced. Fungicides can be added to the paint.

2007-10-06 03:41:40 · answer #4 · answered by Wylie Coyote 6 · 1 0

Remove the paint, use bleach. You may have to take down the dry wall as mold will probably be on the other side too. But bleach will kill mold.

2007-10-06 03:39:14 · answer #5 · answered by Anonymous · 1 1

A spray bottle with straight bleach. Just spray & walk away & it will do the rest rather quickly.

2007-10-06 03:54:05 · answer #6 · answered by windeee thumper 3 · 2 0

You can try wipeing the area down with some vodka. It kills things like mildew and keeps them from reappearing.

2007-10-06 03:54:56 · answer #7 · answered by savahna5 6 · 0 1

Use the appropriate product from a DIY place, or it will come back.

2007-10-06 03:43:47 · answer #8 · answered by cobra 7 · 1 0

wash it with diluted bleach like magic mold be gone

2007-10-06 03:38:37 · answer #9 · answered by clever1 7 · 0 2

You can wash the wall with borax mixed with hot water.

2007-10-06 03:38:26 · answer #10 · answered by notyou311 7 · 0 2

fedest.com, questions and answers