There is only one way and that way is with a couple of sharp putty knifes and lots of patients
2007-10-02 16:08:04
·
answer #1
·
answered by izzie 5
·
0⤊
0⤋
I'm not sure about the drill attachment, it might damage the window frame. The solvent might do the same to the frame (depending on the material).
I personally use a sharp box blade to score it and pull it off slowly while using a putty knife as a backer to "pry" it up and out.
Good Luck.
2007-10-03 10:25:02
·
answer #2
·
answered by tata51576 2
·
0⤊
0⤋
There is actually a tool you can buy that attches to a hand drill....it clears off all the old chalking without harming window panes. It is almost like a small router bit
2007-10-02 23:13:16
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
For me it was a sharp, rigid putty knife. You'll be surprised how easily the glazing fails; it'll come off in large strips. The glass will be held in with glazing points; be careful not to push these too much when removing the old glazing because they can crack the glass.
2007-10-03 00:10:16
·
answer #4
·
answered by Peter 5
·
0⤊
0⤋
I do not remember the name, but they do make a product that softens the caulk. But... you still have to dig it out with a putty knife, a screw driver etc. Try the home repair stores.
2007-10-03 00:28:12
·
answer #5
·
answered by It All Matters.~☺♥ 6
·
0⤊
0⤋
Go to HOme Depot or Lowes. They make a special tool just for that purpose.
2007-10-03 00:22:26
·
answer #6
·
answered by kingsley 6
·
0⤊
0⤋