What kind of fixative should I use to attach metal to tile?

Question

I am going to install a sliding door for a closet. The only problem is that the bottom track of the door is supposed to be screwed to the floor and the floor is tiled. Is there some sort of cement or adhesive that is recommended for this?

Answer 1

If you can use the grout lines just drill with a masonry drill and use plastic anchors with screws. If this doesnt have enough support there is a mastic used for metal floor stripping you can use in addition to the screws. The track is subject to constant stresses its not like a stationary object I would use as many screws as the grout line will afford.

Answer 2

Yes there is but I don't recommend using it. The reason why you screw it in is to hold it steady and level. This is one of the most important parts of the door to make it work correctly.
Adhesives will flex and give over time when used on items that get allot of repetitive motion.
Even though you are fastening it to a tile floor go out and purchase a tile drill bit. 1/4" then lay down the door frame and mark your holes then remove it, drill through the tile using the new bit. Then use a Screw to anchor the door slide to. You may also need a shim or two if the floor is not completely level.

Answer 3

I have to agree with Petethin.

No offense to the young lady with the lights (which endure little or no abuse) and she does offer valid clues.

The issue certainly involves the movement and ction of the doors; but also that neither surface you want to bond are porous.

While I dislike sliding doors; I have installed them, knowing that the customer is always right; even when they aren't

I want to assume that the framework of the doorway is approx. 4 inches. Obviously it may be that NO grout line is in that space; but it's certainly the better way to proceed if such is the case. Of course you can tap con bit, drill through tile, CAREFULLY.

I do have one more suggestion. Some adhesive in a formulation that might cliam at least; that it might hold up in outer space; BUT you might also use angle brackets at each end of the trach; flush them to the walls/ door frame and the track to add some modest support.

Steven Wolf

Answer 4

Liquid Nails works good. Just try not to be too rough on the door. I used this to adhere tube lighting to a cement patio. It's been there for 3 years and hasn't moved.