I do read everywhere that plywood is not so great do to moisture,then what else is out there that won't cost me a furtune,and can be done to hold around the tub area where moisture will be an issue.
I already have nice vinyl on the floor(done by a professional) and will just need to do the tub/whirlpool surrounds and one step myself with this new vinyl tile that I bought.The floor vinyl was install with underlayment.Thats why I wonder if the tub suround will also need the underlayment.
Thanks in advance for the tips!!!
2007-09-29 18:59:09 · 4 answers · asked by brownsugarbr02 2 in Home & Garden ➔ Do It Yourself (DIY)
it would be better, but you can lay the tile over the wood, ,
seal the wood first, let it dry then apply the mastic for your tile, and have at it,
2007-09-29 19:05:12 · answer #1 · answered by William B 7 · 0⤊ 0⤋
William offers a valid clue; and I'll just add my two cents.
No matter what way you choose to proceed; one important issue to consider is that the tile you apply now to "fill in" should become flush with the tile already installed.
If the NEW you bought doesn't match the existing; I assume you're OK with that.
I'm not at all a fan of vinyl tile, but respect those who are. One thing I advise everyone installing vinyl; be it self stick or not; is to apply a Water Based contact cement to both surfaces. DuPont may be one manufacturer. I use it by the gallon, and what I buy is a nice aqua color.
The consistency is thin; it's easily applied; has a less offensive smell; is less toxic than the laquer based; initially cleans up with water; drys rapidly; and is as durable as the lacquer base.
The reason I use it with vinyl tile is because very often the usual cements/adhesives tend to eventually allow lifting, cornering; shifting. Just my opinion and preference.
Steven Wolf
2007-09-30 07:34:28 · answer #2 · answered by DIY Doc 7 · 0⤊ 0⤋
Hi, I'm really not sure on how to go about this one. Any way you go, there is still going to be wood under it all. I think about the most you can do at this point is to make sure all cracks around the tub,and wood are sealed.That includes any cracks and seams in the wood itself. They make an array of caulks and sealants just for this. Don't try to save on the price though,a good one with long life is a must. After you have done that ,I would get a wood preserver ,waterproof,and sealer. Let the product you choose (and choose wisely, some take 45 days to cure) cure fully before applying your tiles. If you skip the recommended time for curing in any way, that most likely will result in voiding it's warranty. After that, you should be fine. What kind of wood is it? Just curious. Byeee
2007-09-30 05:41:59 · answer #3 · answered by Sandyspacecase 7 · 0⤊ 0⤋
Plywood is fine for laying vinyl over. (that is what is used for underlament) If you are worried about moistuure, try not to slop so much water on it, then it will last longer.
2007-09-30 07:14:28 · answer #4 · answered by morris 5 · 1⤊ 0⤋