English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i'm buying a dirtbike and i would like to buy a shed to put it in so that it wont take up space in the garage or unfinished part of the basement, all i want is a shed that will sit by the house that is like this one

http://www.sears.com/shc/s/p_10153_12605_07168602000P?vName=Lawn+%26+Garden&cName=Sheds+%26+Outdoor+Storage&sName=Garden+Sheds

i dont want to pay 500 dollars so i was wondering if anyone could give me some tips, or plans and maybe a cost estimate if i built it myself

2007-09-27 18:01:44 · 3 answers · asked by spiffyshoes 2 in Home & Garden Do It Yourself (DIY)

3 answers

Realtively easy actually. Do you have the ability to put it against the house/ a wall/ a fence? If so it need only be 3 sided.

The material should be exterior ply to begin; and 2x4 treated, as the support/frame/sub floor bracing; material. You can use the measurement examples in that shed you linked too; or your own judgement in what relates to the size of your bike; possible storage shelving; ability to actually get into the shed with the bike; etc.

You can decide the pitch of the roof; take your measurements and apply them to framing out the floor; the uprights; the roof framing; and put that all together. Then cut your facing stock to size and angles; allowing for the pitch of the roof in the framing and facing. Using the same material; or corrugated fiberglass screen room roof panels; aluminum panels; etc. If you choose a Ply roof you can run 90 pound felt and a square of shingles. OR for cost savings just use a tarp for the roof, and the back wall.

Having the shed against a wall will aid in supporting the structure if you can attache it to the wall. The door or doors (one at each end) can be the PLY and strap hinges.

Steven Wolf

2007-09-28 00:51:40 · answer #1 · answered by DIY Doc 7 · 0 0

1

2016-05-03 00:57:39 · answer #2 · answered by ? 3 · 0 0

We just built a garden shed exactly as you described for $1,000. We designed our own using hardiboard, 2 x 4 framing set 16 inches apart, ashphalt roofing and plywoood interiors. We looked at a book we found at the Lowes for ideas and the building instructions. However, our cost did not include the concrete pad because we used the one from our previous shed. It can be done over several weekends, but I recommend getting some help with the hardiboard because it is really heavy. We made the opening big enough for double doors, but in the end opted for a dutch door. It was strong enough to withstand 45 mile an hour Santa Ana winds, too. If you want I can e-mail you photos. But, really check out the books in the Lowes. For $10 it is really helpful to have it on site, especially when you run into problems.

2016-03-19 01:41:55 · answer #3 · answered by Anonymous · 0 0

12,000 Shed Plans & Designs : http://GuideInfos.com/Guide

2015-08-11 23:28:44 · answer #4 · answered by Tera 1 · 0 0

fedest.com, questions and answers