2007-09-27 05:57:11 · 4 answers · asked by a k u h e l m i 1 in Computers & Internet ➔ Computer Networking
This route has been learned via RIP and it learned the route rom a neighbouring device with the IP address. the numbers in the brackets [120/1] 120 is the admin distance and equals RIP the one is the metric and in this case means 1 hop away.
So the network is advertised by the neighbour 192.168.2.2 and is local to that router
2007-09-27 15:27:21 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Well, 192.168.x is a class C, so 192.168.2.2 is not on the same subnet as anything 192.168.3...so I'm not sure. More context would help.
If it's a trace route, then 192.168.2.2 might be the first hop into the 192.168.2.x subnet....?
2007-09-27 13:03:24 · answer #2 · answered by strangefrogg 3 · 0⤊ 0⤋
You're looking at routing information.
Data you send to a device on the network 192.168.3.0 will go to the GATEWAY at 192.168.2.2; in turn that gateway will use it's routing tables to determine how to pass data to it's destination.
If the GATEWAY has an interface on that network itself, it will transmit the data directly to the destination; otherwise it will use it's routing tables to redirect the data.
2007-09-27 13:34:12 · answer #3 · answered by PeterT 5 · 0⤊ 0⤋
192.168.2.2 is an IP Address. It is a string of numbers that uniquely identifies a networked device (computer, printer, etc.) on a network.
2007-09-27 13:02:15 · answer #4 · answered by Yoi_55 7 · 0⤊ 0⤋